Get matched with top metal fabricators and restorers in El Granada, CA
There are 1 highly-rated local metal fabricators and restorers.
Matching on Angi
Verified Reviews for Metal Fabrication And Restoration pros in El Granada, CA
*The Angi rating for Metal Fabrication And Restoration companies in El Granada, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.
*The HomeAdvisor rating for Metal Fabrication And Restoration companies in El Granada, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.
Last update on May 04, 2025
Metal fabricators and restorers in El Granada
Great Metal Designs is a custom ornamental iron work company based in Menlo Park, CA. Our doors have been open since 2011 and during this time we have had the pleasure of serving a broad range of clients. As a custom metal fabricator every job we build is unique & tailor made to our customer's specifications, always ensuring their complete satisfaction and using American made materials only. Call us today for any and all your metal fabrication needs.
"The company founder, Ariel, came by to plan the job first -- installation of 4 beautiful outdoor hand railings -- then brought his small work crew and supervised them until he was sure they were on track, and finally came back to review and approve the job, which was first rate. The hand railings were expertly attached to the concrete steps via reinforced anchor bolts, which makes them all feel rock-solid. I am so glad I contracted with the best for this job, as my partner's safety negotiating the outdoor steps depends upon it!"
Gary S on January 2025
Great Metal Designs is a custom ornamental iron work company based in Menlo Park, CA. Our doors have been open since 2011 and during this time we have had the pleasure of serving a broad range of clients. As a custom metal fabricator every job we build is unique & tailor made to our customer's specifications, always ensuring their complete satisfaction and using American made materials only. Call us today for any and all your metal fabrication needs.
"The company founder, Ariel, came by to plan the job first -- installation of 4 beautiful outdoor hand railings -- then brought his small work crew and supervised them until he was sure they were on track, and finally came back to review and approve the job, which was first rate. The hand railings were expertly attached to the concrete steps via reinforced anchor bolts, which makes them all feel rock-solid. I am so glad I contracted with the best for this job, as my partner's safety negotiating the outdoor steps depends upon it!"
Gary S on January 2025
Custom metal fabrication of all types specializing in mobile tig welding
Custom metal fabrication of all types specializing in mobile tig welding
We provide mobile welding serves for San Francisco and Alameda Counties. We will come to you to repair metal products used in restaurants, residences, municipalities, HOAs, fences, railings, stairs, awnings, plumbing (boilers & furnaces), and, industrial operators who need large equipment broken down to smaller pieces. We have the ability to work with stainless and exotic steels. Tom's Metal Specialists, Inc. (also referred to as "TMS"), based in San Francisco was founded in 1996 as a metal subcontractor providing steel and stainless steel fabrication and erection services to Northern California. TMS operates out of two facilities located in San Francisco: a 7,200 sq. ft. structural steel facility (with overhead crane) at 1416 Wallace Ave. and an additional 5,000 sq. ft. facility for architectural/ornamental work.
We provide mobile welding serves for San Francisco and Alameda Counties. We will come to you to repair metal products used in restaurants, residences, municipalities, HOAs, fences, railings, stairs, awnings, plumbing (boilers & furnaces), and, industrial operators who need large equipment broken down to smaller pieces. We have the ability to work with stainless and exotic steels. Tom's Metal Specialists, Inc. (also referred to as "TMS"), based in San Francisco was founded in 1996 as a metal subcontractor providing steel and stainless steel fabrication and erection services to Northern California. TMS operates out of two facilities located in San Francisco: a 7,200 sq. ft. structural steel facility (with overhead crane) at 1416 Wallace Ave. and an additional 5,000 sq. ft. facility for architectural/ornamental work.
Since 2007, Xsys Engineering Inc. has been a recognized leader in providing world-wide sales, service and advanced technical assistance in support of automated systems utilized in the fabrication and production of multiple manufacturing processes. Our primary area of expertise is providing complete, comprehensive support for the semiconductor manufacturing industry; as well as the numerous sub-industries that are interdependent on the base process of wafer manufacturing. This includes the production processes related to Hard Disk Drive and Memory Storage Devices, Optics and Laser applications, as well as Solar and other Alternative Energy Technologies
Since 2007, Xsys Engineering Inc. has been a recognized leader in providing world-wide sales, service and advanced technical assistance in support of automated systems utilized in the fabrication and production of multiple manufacturing processes. Our primary area of expertise is providing complete, comprehensive support for the semiconductor manufacturing industry; as well as the numerous sub-industries that are interdependent on the base process of wafer manufacturing. This includes the production processes related to Hard Disk Drive and Memory Storage Devices, Optics and Laser applications, as well as Solar and other Alternative Energy Technologies
Ornamental metals contractor who is bonded and insured. Licensed California contractor and local business entity in the city of San Francisco. Small fabricator and installer, with a handful of dedicated welders and metal specialists. None of the work is subcontracted, and typical billing procedures are that of a contractor (10% down, progress payments until completion).
"I have dealt with Andrew Kim AMF_ _ K Andrew Kim is a proffesional conartist scammer That is using the internet with fradurlent advertisment photos pulled of the internet of other companies work. and posting as his work. The photo on his website with Andrew Kim AMFK standing in a stainless steel counter kitchen is a clever photo that is pretty ovious it's been photo shopped. His clam of years in business and eexperiance of 20 years in stainless steel is another deceptive narrative, and can be easily traced back when fraudulent postings / advetismens started poping up, Andrew Kim / AMFX Does not have the the design capabilities and more so in the process of building the design to completion. What is more damaging to honest businesses and review sites are People like this that look legitimate have wasted your time in compleation of your project has no technical experience with a very unforgiving metal as stainless steel but claims he does, Beware of this Crack Pot Crack head this is a waste of your time and if you are foolish enough to give him money good luck in getting your product or money back from a person hiding behind a P.O. Box Business Address,"
Tony L on May 2021
Ornamental metals contractor who is bonded and insured. Licensed California contractor and local business entity in the city of San Francisco. Small fabricator and installer, with a handful of dedicated welders and metal specialists. None of the work is subcontracted, and typical billing procedures are that of a contractor (10% down, progress payments until completion).
"I have dealt with Andrew Kim AMF_ _ K Andrew Kim is a proffesional conartist scammer That is using the internet with fradurlent advertisment photos pulled of the internet of other companies work. and posting as his work. The photo on his website with Andrew Kim AMFK standing in a stainless steel counter kitchen is a clever photo that is pretty ovious it's been photo shopped. His clam of years in business and eexperiance of 20 years in stainless steel is another deceptive narrative, and can be easily traced back when fraudulent postings / advetismens started poping up, Andrew Kim / AMFX Does not have the the design capabilities and more so in the process of building the design to completion. What is more damaging to honest businesses and review sites are People like this that look legitimate have wasted your time in compleation of your project has no technical experience with a very unforgiving metal as stainless steel but claims he does, Beware of this Crack Pot Crack head this is a waste of your time and if you are foolish enough to give him money good luck in getting your product or money back from a person hiding behind a P.O. Box Business Address,"
Tony L on May 2021
Wrought Iron/Steel Fabricators dedicated to our customers. we offer Shop drawings with revisions, our #1 goal is satisfied customer.
Wrought Iron/Steel Fabricators dedicated to our customers. we offer Shop drawings with revisions, our #1 goal is satisfied customer.
Family owned Business that manufactures pre-fab Horse Barns, Buildings, Arenas, Shelters & Fencing
Family owned Business that manufactures pre-fab Horse Barns, Buildings, Arenas, Shelters & Fencing
3-4 employees. No sub. Cost is determined by the job travel charge of $35 emergency service charge $125 to $250
3-4 employees. No sub. Cost is determined by the job travel charge of $35 emergency service charge $125 to $250
Best prices around for all your engraving or sport teams needs. Call for service with a smile.
Best prices around for all your engraving or sport teams needs. Call for service with a smile.
Metal fabrication and restoration services FAQs
Metal fabrication is a large umbrella term that can include bending metal, welding, cutting, stamping, drilling, forging, and casting. Metal fabricators often have quite a few pieces of specialized machinery and experience in the different forms of fabrication, which means they’re able to handle many different forms of metal work. An experienced metal fabricator might be able to tackle everything from creating metal siding or roofing from raw materials to constructing a custom wrought iron fence.
The average hourly rate for a metal fabricator is around $70, but the scope of your project will play a big role in your total costs. A good way to get an estimate for your metal fabrication project is to multiply the cost of raw materials by four. A quarter of your total typically goes toward material, and three quarters goes toward labor. Some factors that can influence your metal fabrication costs include the difficulty of your project, the metal you’re using, and your specified design.
A welder is a metal worker that uses heat and specialized tools to bind metal together, while a sheet metal worker more often uses cold methods to bend thin sheets of metal into shape for siding, roofing, or some other application. A metal fabricator might use one or both of these metal working techniques, along with others, to provide a wider range of services. In many cases, a metal fabricator is the most likely to be able to handle your metal project.
- Moss Beach
- Montara
- Pacifica
- Hillsborough
- Millbrae
- Half Moon Bay
- Burlingame
- San Bruno
- Belmont
- San Mateo
- South San Francisco
- San Carlos
- Foster City
- Colma
- Woodside
- Redwood City
- Daly City
- Brisbane
- San Francisco
- Atherton
- Menlo Park
- Portola Valley
- Palo Alto
- East Palo Alto
- La Honda
- Alameda
- Los Altos
- Los Altos Hills
- San Lorenzo
- San Leandro
Get our Angi-powered app
