Get matched with top metal fabricators and restorers in Cedar Ridge, CA
There are 1 highly-rated local metal fabricators and restorers.
Verified Reviews for Metal Fabrication And Restoration pros in Cedar Ridge, CA
*The Angi rating for Metal Fabrication And Restoration companies in Cedar Ridge, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.
*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Cedar Ridge, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.
Last update on May 31, 2025
Metal fabricators and restorers in Cedar Ridge
Devil Mountain Landscape (DML) started in Danville, CA in the late 80’s working with a local Nursery Company, Developers (Commercial) and Single Family Homeowners (Residential). The Company officially went independent in 1993 and continued through present day. Commercially we contracted for entire sub-divisions to install all the front yards to individual homes along with the access points and entrances to include large-scale Country Clubs (e.g. Blackhawk C.C.) as well. In 2003, we established State-wide Contracts with Insurance Carriers to Repair & Install Fences (Wood, Iron & Vinyl). In 2010, we began to expand our offering into Block Walls (Masonry & Retaining). In 2017, we became a Preferred Vendor for Construction Loans with U.S. Bank and built several homes in the South Bay (Los Gatos to Gilroy) from $1.5M to 3.0M. In 2019, we migrated to the Sacramento area focusing on Detached Garages and Granny Homes under 1,200 Sq. Ft. We offer extreme diversity to limit the number of Sub-Contractors necessary for any project while maintaining high quality and competitive pricing, so you (the Homeowner) end up with your vision of what your property should look like at a reasonable Cost. We have multiple licenses: C-13 (Fencing), C-27 (Landscaping) & B (General Building). For a small Company, we have a big foot print. We have the right mix of equipment and human resources for any size project. Please don’t hesitate to inquire.
"As of now the best looking fence in my neighborhood sits in my yard. I asked for a 7 ft. privacy fence from Devil Mountain and I am pretty happy with the finished product. The frame is extremely sturdy with 4x6 posts and the slats are a very nice redwood. The gate is very sturdy too with roller pins instead of hinges. The gate will never sag. What else can I say? They really did A+ work."
Stephen M on May 2025
Devil Mountain Landscape (DML) started in Danville, CA in the late 80’s working with a local Nursery Company, Developers (Commercial) and Single Family Homeowners (Residential). The Company officially went independent in 1993 and continued through present day. Commercially we contracted for entire sub-divisions to install all the front yards to individual homes along with the access points and entrances to include large-scale Country Clubs (e.g. Blackhawk C.C.) as well. In 2003, we established State-wide Contracts with Insurance Carriers to Repair & Install Fences (Wood, Iron & Vinyl). In 2010, we began to expand our offering into Block Walls (Masonry & Retaining). In 2017, we became a Preferred Vendor for Construction Loans with U.S. Bank and built several homes in the South Bay (Los Gatos to Gilroy) from $1.5M to 3.0M. In 2019, we migrated to the Sacramento area focusing on Detached Garages and Granny Homes under 1,200 Sq. Ft. We offer extreme diversity to limit the number of Sub-Contractors necessary for any project while maintaining high quality and competitive pricing, so you (the Homeowner) end up with your vision of what your property should look like at a reasonable Cost. We have multiple licenses: C-13 (Fencing), C-27 (Landscaping) & B (General Building). For a small Company, we have a big foot print. We have the right mix of equipment and human resources for any size project. Please don’t hesitate to inquire.
"As of now the best looking fence in my neighborhood sits in my yard. I asked for a 7 ft. privacy fence from Devil Mountain and I am pretty happy with the finished product. The frame is extremely sturdy with 4x6 posts and the slats are a very nice redwood. The gate is very sturdy too with roller pins instead of hinges. The gate will never sag. What else can I say? They really did A+ work."
Stephen M on May 2025
Summit fence is your one-stop shop for all your fencing needs. From residential wood, vinyl and ornamental iron fencing, to commercial security, and even agricultural/field fencing, we have the experience and ability to complete your projects on time and on budget. We work with multiple suppliers to consistently offer the best value for our customers. Open, honest, and detailed estimates are always free of charge. With multiple crews and a management staff boasting nearly 100 years of experience, there is no project we can not handle. Call today for your free estimate.
"Summit Fence and their employees are phenomenal! My project was initially discussed, clarified, estimated (price), confirmed in writing and scheduled to begin in a very reasonable amount of time. I was expecting to have to wait much longer and was pleasantly surprised that I was not having to wait as long as other contractors were estimating. Our job lasted one more day than originally thought, however, considering that the employees had to hand dig near buried utilities in order to avoid any costly damage, I was not bothered in the least with this delay. It was to be expected and appreciated. We were always notified when they arrived in the morning, and the foreman/supervisor (Ryan) made several visits to oversee that the project was being completed according to plan. Communication was NEVER LACKING with this company!!"
Irene B on August 2023
Summit fence is your one-stop shop for all your fencing needs. From residential wood, vinyl and ornamental iron fencing, to commercial security, and even agricultural/field fencing, we have the experience and ability to complete your projects on time and on budget. We work with multiple suppliers to consistently offer the best value for our customers. Open, honest, and detailed estimates are always free of charge. With multiple crews and a management staff boasting nearly 100 years of experience, there is no project we can not handle. Call today for your free estimate.
"Summit Fence and their employees are phenomenal! My project was initially discussed, clarified, estimated (price), confirmed in writing and scheduled to begin in a very reasonable amount of time. I was expecting to have to wait much longer and was pleasantly surprised that I was not having to wait as long as other contractors were estimating. Our job lasted one more day than originally thought, however, considering that the employees had to hand dig near buried utilities in order to avoid any costly damage, I was not bothered in the least with this delay. It was to be expected and appreciated. We were always notified when they arrived in the morning, and the foreman/supervisor (Ryan) made several visits to oversee that the project was being completed according to plan. Communication was NEVER LACKING with this company!!"
Irene B on August 2023
Here at Fox Welding we are a full service licensed and insured mobile welding company. No onsite welding project is out of our wheelhouse and we pride ourselves on keeping our customers happy and getting the job done the right way. Call now for a free quote.
"My welder Kassie did a great job on my project and I would definitely recommend her to anyone who needs high quality welding done."
Paul S on April 2023
Here at Fox Welding we are a full service licensed and insured mobile welding company. No onsite welding project is out of our wheelhouse and we pride ourselves on keeping our customers happy and getting the job done the right way. Call now for a free quote.
"My welder Kassie did a great job on my project and I would definitely recommend her to anyone who needs high quality welding done."
Paul S on April 2023
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job. Over 12 years experience
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumers needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job. Over 12 years experience
Small engine repair, around the house work, weedeating, tree work, small welding jobs like fence and gate repair
Small engine repair, around the house work, weedeating, tree work, small welding jobs like fence and gate repair
Quality custom metal fabrication. We built custom truck beds to metal gates. We have a large laser that cuts up to 1" plate.
Quality custom metal fabrication. We built custom truck beds to metal gates. We have a large laser that cuts up to 1" plate.
We understand what an inconvenience collision repair can be.That is why we built our process around your needs. Our focus is on a hassel free repair. We do this creating a customer repair experience built around you, your needs and your satisfaction. B & M Auto Body and Paint has some of the finest technicians in the area for all of your auto body repair needs. We specialize in Collision repair, Auto Body Restoration, RV and Boat repair, Auto Body Modifications, and much more.
We understand what an inconvenience collision repair can be.That is why we built our process around your needs. Our focus is on a hassel free repair. We do this creating a customer repair experience built around you, your needs and your satisfaction. B & M Auto Body and Paint has some of the finest technicians in the area for all of your auto body repair needs. We specialize in Collision repair, Auto Body Restoration, RV and Boat repair, Auto Body Modifications, and much more.
Mid-Valley Pipe & Supply
Mid-Valley Pipe & Supply
Advance Construction is a full Service General Contracting/General Building Construction Company. We Hold a General Contractor building License in California. CSL#1005559 We have been serving the Northern California area since 2008. We offer many construction services to take on any building task. We also have a Metal working/ Ornamental Iron division. Including Custom Metal Fabrication and Installation of Gates, Fencing, Structural steel work, and Mobile welding/Repair. Our Construction Team works well with homeowners or other contractors to bring our clients visions and building plans to life. From remodels, and complete renovations to NEW Construction and design. Give us a call for your next project.
Advance Construction is a full Service General Contracting/General Building Construction Company. We Hold a General Contractor building License in California. CSL#1005559 We have been serving the Northern California area since 2008. We offer many construction services to take on any building task. We also have a Metal working/ Ornamental Iron division. Including Custom Metal Fabrication and Installation of Gates, Fencing, Structural steel work, and Mobile welding/Repair. Our Construction Team works well with homeowners or other contractors to bring our clients visions and building plans to life. From remodels, and complete renovations to NEW Construction and design. Give us a call for your next project.
Metal fabrication and restoration services FAQs
Metal fabrication is a large umbrella term that can include bending metal, welding, cutting, stamping, drilling, forging, and casting. Metal fabricators often have quite a few pieces of specialized machinery and experience in the different forms of fabrication, which means they’re able to handle many different forms of metal work. An experienced metal fabricator might be able to tackle everything from creating metal siding or roofing from raw materials to constructing a custom wrought iron fence.
The average hourly rate for a metal fabricator is around $70, but the scope of your project will play a big role in your total costs. A good way to get an estimate for your metal fabrication project is to multiply the cost of raw materials by four. A quarter of your total typically goes toward material, and three quarters goes toward labor. Some factors that can influence your metal fabrication costs include the difficulty of your project, the metal you’re using, and your specified design.
A welder is a metal worker that uses heat and specialized tools to bind metal together, while a sheet metal worker more often uses cold methods to bend thin sheets of metal into shape for siding, roofing, or some other application. A metal fabricator might use one or both of these metal working techniques, along with others, to provide a wider range of services. In many cases, a metal fabricator is the most likely to be able to handle your metal project.
Get our Angi-powered app
