Get matched with top woodworkers in Paris, AR

Q: How do you cut trim for doorways?

• <div><p>There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you&rsquo;re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you&rsquo;ll need to power up the saw again with a new piece. </p><p>Butted joints&mdash;also called shaker style&mdash;don&rsquo;t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.</p></div>

Q: How long will landscape timbers last in the ground?

• <div><p>Landscape timbers can last <b>10 to 20 years</b> in the ground when installed correctly. Pressure-treated timbers will last longer than non-treated ones, as pressure treatment makes the wood more rot-resistant. Wood exposed to high moisture levels or extreme temperature and weather fluctuations may not last as long as wood in drier areas with more consistent weather.</p></div>

Q: Do joists sit on beams?

• <div><p>Joists do distribute their load to beams, but they don&rsquo;t sit on top of the beams. Instead, home builders nail or screw the joists directly to the beams such that the end of the joist butts up against the edge of the beam. Beams can sit on other beams for support, but you&rsquo;ll never see a joist sitting on top of a beam or another joist.</p></div>

Q: What is the difference between a spindle and a baluster?

• <div><p>Many people, including professionals in the field, use baluster and spindle interchangeably to describe the vertical components of a railing (or technically, a balustrade). However, there are subtle or distinct differences, depending on who you ask. The most common interpretation is that spindles are thin or delicate versions of balusters. </p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Paris, AR?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Paris, AR

*The Angi rating for Woodworking companies in Paris, AR is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Paris, AR is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on July 21, 2026

Reviewed in July 2026
We had WC Foundation Experts perform slab concrete raising, and the entire experience was outstanding. After getting several quotes, they were the only company that took the time to honestly explain what actually needed to be done and what repairs could safely wait. Instead of trying to sell us...
Wells Capital, LLC
Request a quote
Reviewed in April 2026
Isaiah Kury did a very good job and I would highly recommend him. He put in a whole house generator for us first. Then we had trouble with our electrical box a year later and ended up putting a New new electric box as well as fix the electrical on our gas furnace that the gas man did not wire...
Kury Electric LLC
Request a quote
Reviewed in February 2026
He put flooring in my attic. The job was great and the price more reasonable than I expected. Will definitely have him back for more work and recommend him to others.
Southern Values Work Construction
Request a quote
Reviewed in February 2025
HandyKoons LLC was very efficient and very professional.I’m happy with their work.I hired them to hang ceiling fans, and to do some wall framing and tile work.I call Tristan or Cameron, they always call me back to set up an appointment and they show up on time to do good quality work.
Handy Koons, LLC
Request a quote
Reviewed in October 2024
Job was done quickly and efficiently. Arthur was very helpul and offered good advice on wood stoves
ProQual Services
Request a quote
Reviewed in July 2024
Great service! Hadan painted, installed carpeted and new light fixtures in one room. He was prompt, thorough and professional and we will definitely use his services again!
Hadan Construction Services
Request a quote
Reviewed in July 2023
Fast, efficient, and friendly as can be! They did a great job! I'm telling all my neighbors! Don't hesitate. These are the people you want to work with.
Natural State Hauling LLC
Request a quote
Reviewed in November 2022
Honest and reliable! Highly recommend. Best in area!!! Farm needed frost proof livestock waterers and deep well wasnâ t working when property was purchased. No more dragging water hoses 150â ! Horses are happy, donkeys are thrilled and wife is glad i called the right contractor for the job!
Clear Water Pump and Well Service, LLC
Request a quote
Reviewed in September 2022
If you can imagine it, they can build it. I showed them what I wanted & they built it. The beds were built so that they could be rolled out of the wall for easy access when putting sheets on the bed. The walls now have a herringbone pattern using wood flooring. These guys made sure everything...
Safe Elite Transformations, LLC
Request a quote
Reviewed in February 2022
got back with me super fast and got my trees removed and hauled away in a hurry. i was very happy with the job they did and i would recommend them to anyone. 10/10
S&B Lawn And Landscaping
Request a quote

Find Woodworkers in Paris

Overcomer Handyman

5.0(

)

Gazebo or Freestanding Porch - RepairGazebo or Freestanding Porch - Repair - For Business

Serving Paris, AR and surrounding areas

Approved

In business since 2020

Free estimates

Warranties offered

"Excellent repair work on jobs big an small. Kind, honest."

+11

Response time1 day

Response rate100%

1 neighbors recently requested a quote

Gazebo or Freestanding Porch - RepairInterior Trim and Decorative Moldings - Repair

Serving Paris, AR and surrounding areas

Approved

In business since 2019

Free estimates

Credit card accepted

"Cody is an incredible worker, he plumbed my entire tiny home quickly and very well! He works quickly and was very budget friendly! I will be using his business from now on!"

Response time5 hrs

Response rate89%

2 neighbors recently requested a quote

Gazebo or Freestanding Porch - RepairGazebo or Freestanding Porch - Repair - For Business

Serving Paris, AR and surrounding areas

Approved

In business since 2023

Free estimates

Warranties offered

"Best decision ever. Aaron was very well versed in his knowledge of all the things I had him do. I was So glad to have found him. I had no worries of what he was doing or when he was doing it. I didn't have to check to see what he was doing. i didn't have to clean up behind him, and the big one, Was The Job Done Right?? And you can bet that it was..I didn't find one single thing that he didn't know about. Extremely trustworthy!! I had him doing work at my home while I was at work which was a big help to me as my husband passed away in the middle of these projects. But Aaron pulled through and worked with me to finish the projects.. Great guy...couldn't ask for any better.. and My Place Looks GREAT!!!!;"

+37

Response time6 hrs

Recommended by50%of homeowners

Carpentry Framing - InstallCustom Cabinets - Build

Serving Paris, AR and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"I was very impressed with Sentri Homes - their customer service was excellent. They sent a subcontractor to install some vinyl laminate in my bathroom and he ended up getting glue all over the carpet in our bedroom. The sub ended up ghosting both me and Sentri, leaving me stuck with a ruined carpet. Sentri stuck with me for over a month to get the carpet replaced with the identical original and to get the vinyl job 100% completed. The carpet was a Home Depot exclusive and Sentri handled everything with them. I will be using Sentri for a much bigger renovation I have coming up soon, because I know that they will make sure everything gets done right no matter what problems come up. The vinyl looks great too."

20 neighbors recently requested a quote

Request Quote

T&P woodworking and carpentry

New to Angi

Gazebo or Freestanding Porch - RepairGazebo or Freestanding Porch - Repair - For BusinessInterior Trim and Decorative Moldings - Repair+1 more

Serving Paris, AR and surrounding areas

Approved

Welcome to TIP Woodworking!\nMy name is Tanner, I am the owner of this company and I also run this Angi page. I have a passion and love for all things woodworking and carpentry.

Request Quote

David Fixes It

New to Angi

Gazebo or Freestanding Porch - RepairGazebo or Freestanding Porch - Repair - For BusinessInterior Trim and Decorative Moldings - Repair+1 more

Serving Paris, AR and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

David Fixes It provides dependable handyman help for homeowners who need small repairs, assembly, maintenance, and punch-list projects handled correctly. Services may include furniture assembly, shelving, fixture installation, minor repairs, caulking, touch-ups, basic property maintenance, tile-related work, door hardware, small household fixes, and general home improvement support.\n\nI focus on clear communication, honest work, clean job areas, and practical solutions. Small jobs are welcome, and I’m comfortable helping with the kinds of repairs and projects that are easy to put off but make a real difference around the home.\n\nBased in the Fort Smith / Greenwood area, David Fixes It is built for homeowners who want reliable help, straightforward service, and someone who will show up ready to work.

1 neighbors recently requested a quote

Request Quote

Raymond Phillips

New to Angi

Furniture - Build Custom

Serving Paris, AR and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

Retired and looking to preform repairs, installed flooring for 12 years, Hardwood, laminate Ceramic floor tile. Finished out several houses. clean up and haul off.

Request Quote

Whole Home Services

New to Angi

Furniture - Build Custom

Serving Paris, AR and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

Simple handyman service specializing in affordable solutions for our clientele

4 neighbors recently requested a quote

Closet - BuildCustom Cabinets - Build

Serving Paris, AR and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"AWD went above and beyond to make sure we had exactly what we needed. Their service was excellent. Their cabinets were made on time and of exceptional quality. I would recommend them to anyone."

Recommended by100%of homeowners

Interior Trim and Decorative Moldings - Repair

Serving Paris, AR and surrounding areas

In business since 2000

Warranties offered

Small jobs welcome

"The job was done great, I have plans to hire these guys again for other works."

Response time2 days

Response rate100%

Recommended by25%of homeowners

Request Quote

...

Showing 1-10 of 71

Woodworking questions, answered by experts

There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you’re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you’ll need to power up the saw again with a new piece.

Butted joints—also called shaker style—don’t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.

Landscape timbers can last 10 to 20 years in the ground when installed correctly. Pressure-treated timbers will last longer than non-treated ones, as pressure treatment makes the wood more rot-resistant. Wood exposed to high moisture levels or extreme temperature and weather fluctuations may not last as long as wood in drier areas with more consistent weather.

Joists do distribute their load to beams, but they don’t sit on top of the beams. Instead, home builders nail or screw the joists directly to the beams such that the end of the joist butts up against the edge of the beam. Beams can sit on other beams for support, but you’ll never see a joist sitting on top of a beam or another joist.

Many people, including professionals in the field, use baluster and spindle interchangeably to describe the vertical components of a railing (or technically, a balustrade). However, there are subtle or distinct differences, depending on who you ask. The most common interpretation is that spindles are thin or delicate versions of balusters.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The Paris, AR homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
René Bennett
•
May 3, 2026May 3, 2026
How Much Does a Cord of Wood Cost? [2026 Data]
Whether you need to heat your home for the winter or simply enjoy lighting a fire occasionally, it's helpful to know the cost of a cord of wood in your area.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.