Get matched with top concrete driveway pros in Lockesburg, AR

Yes, you can remove oil stains from your driveway by applying an absorbent material such as baking soda, sawdust, or cat litter, pouring on a liquid detergent such as dish soap, scrubbing the area, and rinsing with water. You can also use a diluted bleach solution, white vinegar, or TSP solution on concrete.

The prevention steps are essentially the same, no matter the patio material. Keep the surface clean and maintained. Ensure there's no debris buildup, and cover the whole thing in a quality sealant. If it's the start of a season or it's been a while since you've cleaned the area, use a pressure washer.

Yes, fiber concrete can crack, and contrary to popular belief, it will crack under similar forces to rebar-reinforced concrete. The difference is in how the crack spreads through the slab. When you exert pressure on a slab, the slab flexes downward, putting tensile forces on the bottom of the slab. In rebar concrete, a crack at the bottom will also quickly appear on the top surface. In fiber concrete, the fibers hold the two sides of that bottom crack together, making it less likely for the crack to form on the top surface.

Concrete dries faster in the heat than in the cold, but when concrete cures too fast, it can cause weak concrete. It’s best to pour concrete when temperatures are between 50 and 85 degrees Fahrenheit, watering it five to 10 times per day for seven days (unless you pour concrete in the winter). Slower cure times, such as when pouring concrete in cold weather, can cause strong concrete, but you need to monitor the temperature drop and moisture levels. Avoid pouring concrete when temperatures are below 40 degrees Fahrenheit.