Get matched with top driveway sealcoating pros in Lepanto, AR

The main difference between asphalt and blacktop is that asphalt has a lower ratio of bitumen—a low-grade tar-like crude oil—than blacktop. While blacktop is heated to 300 degrees or more, hot-mix asphalt is heated to a lower temperature, typically between 275 and 300 degrees Fahrenheit. Consult an asphalt driveway professional about which type of material is the best fit for your future asphalt driveway.

If you don’t want to seal the entire driveway using a squeegee, you can use a roller instead. Rolling the driveway sealer also provides an even, sufficient coating, although it might require more skills to control the speed and pressure. We don’t recommend spraying the driveway sealer because it would cause more splash, hence wasting more material. If anything, you may spray the sealant and go over the surface again with a squeegee to ensure proper coating.

If you notice minor cosmetic problems with your driveway, you should seal it. Look out for cracks and holes on the surface, faded asphalt or concrete, and stains from oil and other chemicals. Replacing your driveway may be necessary if you’re dealing with significant problems—¼-inch cracks, large potholes, and puddles from drainage issues. The cost to install an asphalt driveway typically ranges between $4,200 and $9,000, significantly more than resealing. Consider talking to a professional to discuss whether resurfacing your driveway—a midway project between resealing and replacing—is a better option for you.

Maintaining a driveway depends on the material your driveway is made of. Concrete and asphalt should be sealed to protect against water and freeze-thaw cycles. Cracks and expansion joints should be filled with a flexible polyurethane caulk or asphalt sealer. Before you apply a sealant to your driveway, consider pressure washing the surface. It will take off any loose sealant and any grime that might have caused a stain. Sealing over dirt and stains will trap it under the sealer.

If you live in colder climates, consider using sand rather than salt to de-ice. Sand helps melt the snow and ice without speeding up the freezing and unthawing process of your driveway, which helps prevent cracks from forming from the constant fluctuation of temperatures.