Get matched with top fence painters in Eudora, AR

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again. 

If you’re deciding between limewash versus whitewash, know that both have a chalky matte appearance. Limewash is made from lime, water, and sometimes pigment, while whitewash consists of lime, water, white chalk, and binders (though you can get a similar look with watered-down white paint). Whitewash has fewer options for color customization, and it sits on surfaces instead of being absorbed into them, which can trap moisture. Whitewashing costs less—about $1.40 to $4.20 per square foot.

You should inspect the area regularly for rust, clean it with a wire brush, repaint it every few years, and apply a protective sealant to prevent corrosion.

Wood stain does go bad, but it will last in the can for between three and six years, provided you use proper storage techniques. Storing wood stain in open containers or in extremely low or high temperatures will cause your wood stain to become unusable much more quickly. Water- and latex-based wood stains typically last for just two to four years, while oil-based wood stains can last for three to six years.