Get matched with top garbage collectors in Cotter, AR

These appliances do unscrew, but you need to disconnect everything properly when you replace your garbage disposal. Make sure you shut the power off to the area first and check that it’s off with a voltage detector. Disconnect the main drain line and P-trap, and then disconnect the dishwasher drain line if you have one connected. You can then unscrew your garbage disposal using a disposal wrench. Just make sure you disconnect the electrical lines before removing your appliance.

If your garbage disposal powers up and you can hear it hum, but the arms inside aren’t moving, the problem might be a stubborn clog, a build-up of grease, or a jam of the impeller plate. To troubleshoot these, ensure your unit is off and disconnected from its power source before checking inside the drain or attempting to manually rotate the impeller arms or plate from the underside of the unit. A hex wrench can help.

It’s one thing that helps, alongside vinegar and baking soda. Ice acts as an exfoliant, helping to lift off any bits of food stuck on the disposal blades.

Never put glass in the garbage disposal. It can damage your disposal or eject shards of glass out of the disposal and cause injury. If you get broken glass in your garbage disposal, turn it off and cut the power from the breaker, use a tool like pliers or tongs to remove the glass, and use a wet-dry vacuum to remove the remaining glass pieces. If you can’t access the disposal safely, call a garbage disposal repair pro.