Get matched with top deck maintenance specialists in Millport, AL

Will pressure-treated wood rot? This wood could eventually suffer from rot, although it takes longer compared to untreated wood. Even though the chemicals applied to pressure-treated wood protect it, they eventually dissipate and leave the wood vulnerable. You can delay the appearance of rot in the treated wood by reducing its direct exposure to moisture and by painting it. Using fewer screws or nails in the wood—and thereby creating fewer holes in it—also delays the chances of rot forming.

You can use a few different tactics to prevent your deck gate from sagging. Aside from using strong, rot-resistant woods, introducing a diagonal element—such as a tension rod or solid piece of wood to act as a brace—across the gate will offer better support. You can also use rigid joists to prevent the gate from sagging.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

Yes, you can absolutely replace just one damaged spindle as long as you can find a matching replacement. However, if multiple spindles are damaged or you can't find an exact match, you might consider replacing an entire section for a more uniform look and structural integrity.