Best stone countertop pros near Clanton, AL

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Different types of engineered stone countertops require varying installation methods. The best option is to hire a countertop installer, especially if you are unfamiliar with the stone you plan to use. Generally speaking, quartz is the easiest for DIYers because you can cut it on site with a diamond blade and diamond hole saw. The average DIYer is unlikely to have the special tools to cut sintered stone countertops. Before diving into a project, make sure you have the experience and tools to do the job correctly.

The cost to install a kitchen island ranges from $900 to $6,500, with an average price of around $4,800. The final cost depends on whether you buy a prefabricated unit or have one custom-built. Prefabricated kitchen islands are generally cheaper. A simple prefabricated cart can cost between $150 and $900, while a permanent, stationary prefabricated island costs from $900 to $5,000. A custom-built kitchen island averages around $4,800 but can cost $10,000 or more depending on factors like materials, size, design complexity, and accessibility.

Caesarstone® offers both quartz and porcelain counters, which are types of engineered stone countertops. Generally, you can expect to pay $50 to $200 per square foot for quartz countertops. If you decide to go with Caesarstone® quartz counters, then you’ll pay $75 to $125 per square foot, which is in the mid-range of what most quartz manufacturers charge.

Additionally, Caesarstone® is typically less expensive than quartzite, which is a natural quartz countertop that costs $80 to $220 per square foot. Depending on the Caesarstone® countertop you choose, you may spend significantly more on quartzite counters.