Get matched with top structural engineers in Seward, AK

Q: Can I build over a stump?

• <div><p>Yes, you can build over a stump if the roots are no longer alive. Living roots will continue to grow and may damage your new construction over time. Similarly, you should also remove rotting stumps because they may continue to attract pests and even cause new structures (especially those made from wood) to decompose as well. </p></div>

Q: How much does a structural engineer cost?

• <div><p><a href="https://www.angi.com/articles/how-much-does-structural-engineer-cost.htm">Structural engineers typically charge</a> between <b>$100 and $250</b> <b>per hour</b>, but many jobs won&rsquo;t be based on a per-hour fee. Instead, the structural engineer will offer a flat rate for the inspection and structural calculations. The flat rate for a structural engineer costs an average of around <b>$550</b>, but you could see prices ranging from <b>$300 to $800</b>, depending on the complexity of your project and how easy it is to access certain parts of your home for the inspection.</p></div>

Q: Are ceiling joists load-bearing?

• <div><p>Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they&rsquo;re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them. </p></div>

Q: Are horizontal cracks structural?

• <div><p>Many horizontal cracks in home foundations result from water and soil pressure from outside of the building or from a footing that is shifting. Under those circumstances, horizontal cracks are a structural problem that requires repair before they become worse and more difficult to fix. However, in very specific cases, thin horizontal cracks may simply be a cosmetic blemish due to concrete shrinkage. </p></div>

Q: Can I do my own structural calculations?

• <div><p>No, it&rsquo;s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your structural engineering project in Seward, AK?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Seward, AK

*The Angi rating for Structural Engineering companies in Seward, AK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Seward, AK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on November 15, 2025

Reviewed in July 2025
Fast, efficient, reliable. Got it done less than a week. Did structural repairs.
Summit Horizon Contractor Group LLC
Request a quote
Reviewed in August 2017
Work took much longer than estimated. Then, when the engine died less than a year later, they refused to stand by their work. Ended up going to Specialized Import Auto Repair for a new (used Japanese) engine, and have been very happy with their work.
SUPERIOR AUTOMOTIVE SVC
Request a quote
Reviewed in November 2016
The owner cleared the blockages, then suggested we have him run a camera through the piping to the septic tank. We discovered that the piping to the septic tank had come off and was lower than the tank inlet. The owner then showed us the septic tank had flaws, and the grade from the septic tank...
Drain Masters Inc
Request a quote
Reviewed in February 2016
I met the owner and he listed to the engine with a mechanic's stethascope in the parking lot. He said he believed the sound was in the bottom half of the engine and around cylinder's 3 and 4. I explained that I had done a compression test and all 6 cylinders passed with flying colors so I knew...
SAND LAKE AUTOMOTIVE
Request a quote
Reviewed in February 2016
They pulled the valve cover, inspected and listened to it. Their determination was that it was either a plate between the engine and transmission or the engine needed to be replaced. I paid for their time and labor, then sought another opinion.
SENIOR AUTOMOTIVE
Request a quote
Reviewed in October 2015
First, let me apologize publicly to all of my friends and acquaintances that I have referred to 'Accurate' over the years. At one time, AJ was a man of integrity who stood behind the work in his shop and I was always positive about referring people to Accurate. AJ has since, come to find out,...
Accurate Import Center Inc
Request a quote
Reviewed in January 2014
We recently purchased a house that we thought was "move-in ready," as in we wouldn't have to do any remodling or repairs - within 2 weeks of moving in our septic system failed. A+ took care of all the engineering, permitting, and materials procurement for the job. I should have contracted them...
A Plus Home Services Inc
Request a quote
Reviewed in September 2013
I took my vehicle in to check the engine because the light was on because of a suspected fault with my emissions system. They hooked up my car and said yes, they confirmed it was bad and needed to be replaced, but they said that those issues weren't worth fixing because I had more serious...
TUDOR AUTO CARE
Request a quote
Reviewed in September 2013
Very nice people, tried to help, but think they do not know Subaru's very well maybe? Engine light came on, they replaced spark plugs, engine light went off, but then on again. They offered to look at it again free of charge. They ran diagnostics and said all is well, light was off, but then...
HALE'S TECHNICAL SVC
Request a quote
Reviewed in August 2013
Very well. They comped the engine clean because they rolled down the back window and it wouldn't roll back despite hours of effort
Denali Detail LLC
Request a quote

Find Structural engineers in Seward

No results for Structural engineer in

Try adjusting your search criteria.

Structural Engineering questions, answered by experts

Yes, you can build over a stump if the roots are no longer alive. Living roots will continue to grow and may damage your new construction over time. Similarly, you should also remove rotting stumps because they may continue to attract pests and even cause new structures (especially those made from wood) to decompose as well.

Structural engineers typically charge between $100 and $250 per hour, but many jobs won’t be based on a per-hour fee. Instead, the structural engineer will offer a flat rate for the inspection and structural calculations. The flat rate for a structural engineer costs an average of around $550, but you could see prices ranging from $300 to $800, depending on the complexity of your project and how easy it is to access certain parts of your home for the inspection.

Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they’re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them.

Many horizontal cracks in home foundations result from water and soil pressure from outside of the building or from a footing that is shifting. Under those circumstances, horizontal cracks are a structural problem that requires repair before they become worse and more difficult to fix. However, in very specific cases, thin horizontal cracks may simply be a cosmetic blemish due to concrete shrinkage.

No, it’s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.

The Seward, AK homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Dan Simms
•
Oct 15, 2025Oct 15, 2025
How Much Does Beam Installation Cost [2025 Data]
Beam installation costs are an important consideration if you’re building a home or doing renovations. Learn about average costs and factors in this guide.
Dan Simms
•
Oct 13, 2025Oct 13, 2025
How Much Does Steel I-Beam Installation Cost? [2025 Data]
A new steel I-beam is more durable than a wooden one. Learn what factors can affect steel I-beam installation costs and how to budget for this project.
Dan Simms
•
Aug 14, 2025Aug 14, 2025
How Much Does It Cost to Remove a Wall? [2025 Data]
Need to open up your living space or make room for a home addition? Use this guide to estimate the cost to remove a wall in your home before you start.
Rachel Hoffman
•
Nov 18, 2024Nov 18, 2024
Structural Steel Beam vs. Wood Beam: Which Is Right for You?
Structural steel and wood beams ensure your house is structurally sound. Learn the difference between steel and wood beams and how to choose the right one.
Em Norton
•
Oct 23, 2025Oct 23, 2025
How to Tell if a Wall Is Load-Bearing Before Remodeling
Before you can start a major remodel, you need to know how to tell if a wall is load-bearing. Learn what a load-bearing wall is and how to identify one.
Mariel Loveland
•
Oct 20, 2025Oct 20, 2025
Ceiling Joist Spacing 101: How Far Apart Should I Space My Ceiling Joists?
The right ceiling joist spacing will help support your ceiling and prevent sagging, but there are a number of factors to consider. This guide can help.