How Much Does a Sink Install or Repair Cost in Seattle, WA? [2026 Data]

This article was created using automation technology and thoroughly fact-checked and edited by an Angi Editor in accordance with our AI policy.

For a sink install or repair in Seattle, WA, the cost runs $788 on average, and ranges from $335 to $1,242. Your total price depends on the specific sink materials, necessary plumbing modifications, and current local labor rates. Before starting your sink installation or repair, understanding the cost helps you plan a successful project that fits your home and budget.

Sink Install or Repair Cost Factors

When you need a new fixture in Seattle, WA, hiring a local plumber ensures the job is done right. Several elements influence your final bill, from the specific materials you choose to the complexity of the plumbing setup in your home.

New Sink

The price of the fixture itself makes up a significant portion of your total project expenses. In Seattle, WA, homeowners spend an average of $788 for the entire installation, but the sink unit alone dictates whether you fall closer to the low end of $335 or the high end of $1,242. Selecting a basic drop-in model keeps expenses low, while premium farmhouse or vessel sinks push the total higher.

Old Sink Removal

Before putting in a new basin, your plumber must detach and haul away the existing one. Disposing of old materials in Seattle, WA, adds to the labor time, especially if the old sink is cast iron or sealed tightly to the counter. Expect to pay an additional $20 to $300 per project for removal and another $20 to $300 per project for debris disposal.

New Plumbing Pipes

Upgrading your sink requires modifying the water supply lines or drain pipes to fit the new configuration. If your home has older plumbing that struggles with the mild, wet winters in Seattle, WA, replacing these sections prevents future leaks. Expect to spend $150 to $500 per project for kitchen pipe modifications and $200 to $800 per project for bathroom plumbing updates. If you discover broader issues, schedule a pipe repair to protect your property.

Faucet Installation

A new sink pairs best with a fresh faucet, which adds both material and labor expenses to your bottom line. Most homeowners in Seattle, WA, spend $90 to $600 per project for the fixture and labor. If your pro notices slow drainage during the swap, request a drain cleaning service to keep water flowing smoothly.

Garbage Disposal Installation

Adding a garbage disposal streamlines kitchen cleanup and requires electrical and plumbing connections. In Seattle, WA, integrating this appliance costs $400 per project. Coordinating this task at the same time as your sink upgrade saves on overall labor, leaving room in your budget for other upgrades like your water heater installation cost.

How Much Does It Cost to Install a Sink by Type?

Different sink styles carry distinct price points based on their mounting requirements and size. Here is a look at how much each type costs to install in Seattle, WA.

Bar Sink Cost

Bar sinks are compact fixtures perfect for entertainment spaces or kitchen islands. In Seattle, WA, installing a bar sink ranges from $280 to $1,120 per project. Their smaller footprint makes them easier to handle, keeping labor expenses on the lower end.

Drop-In Sink Cost

Also known as self-rimming sinks, drop-in models feature a lip that rests directly on the countertop. Homeowners in Seattle, WA, pay between $270 and $1,390 per project for this style. Because they simply drop into a pre-cut hole, the labor required is minimal.

Undermount Sink Cost

Undermount sinks attach beneath the counter to create a seamless, easy-to-clean surface. This installation in Seattle, WA, costs between $280 and $1,670 per project. The process requires strong adhesives and structural support to hold the basin securely in place.

Farmhouse Sink Cost

Farmhouse sinks feature a deep basin and an exposed front apron that requires custom cabinet modifications. Expect to spend $1,120 to $4,450 per project for this premium style in Seattle, WA. The heavy weight and precise cutting needed make this one of the most labor-intensive options.

Pedestal Sink Cost

Pedestal sinks offer a classic look that frees up floor space in small bathrooms. In Seattle, WA, this fixture costs between $335 and $1,230 per project. The installation involves securing the basin to the wall and aligning the pedestal base to hide the plumbing lines.

Vessel Sink Cost

Vessel sinks sit entirely on top of the vanity counter, creating a striking focal point in a bathroom. Installing this type in Seattle, WA, ranges from $280 to $2,230 per project. The price fluctuates based on the bowl material and the specialized tall faucet required to clear the rim.

Utility Sink Cost

Utility sinks provide a deep, durable basin for laundry rooms, garages, or basements. Homeowners in Seattle, WA, spend $225 to $560 per project for these practical fixtures. They are straightforward to connect, provided the rough plumbing is already in place.

Wall Mount Sink Cost

Wall-mounted sinks attach directly to the wall studs, leaving the floor underneath completely open. This setup in Seattle, WA, costs between $280 and $1,170 per project. The plumber must ensure the wall structure is strong enough to support the weight without a vanity underneath.

Console Sink Cost

Console sinks combine a wall-mounted basin with two or four decorative support legs. Expect to pay $445 to $1,390 per project for this elegant hybrid in Seattle, WA. The exposed plumbing requires careful, aesthetically pleasing pipe connections.

Corner Sink Cost

Corner sinks maximize usable space in tight kitchens or compact half-bathrooms. In Seattle, WA, installing a corner sink costs between $535 and $1,500 per project. The unique angles require custom countertop cuts and complex pipe routing to fit the corner geometry.

How Much Does a New Sink Cost by Material?

The material you select dictates the durability, weight, and overall aesthetic of your new fixture. Heavy materials require extra structural support, which increases labor time in Seattle, WA.

• Stainless Steel: Stainless steel is a classic, rust-resistant option that costs $225 to $1,670 per project.

• Composite: Made from crushed stone and resin, composite sinks resist chips and cost $335 to $670 per project.

• Cast Iron: Finished with a durable enamel, cast iron sinks cost $225 to $1,000 per project.

• Quartz: Quartz sinks match high-end countertops and run between $890 and $1,340 per project.

• Porcelain: Plumbers install porcelain sinks in bathrooms, and they cost $100 to $1,670 per project.

• Glass: Plumbers install glass basins for modern vessel sinks, and they cost $445 to $2,230 per project.

• Copper: Copper develops a unique patina and costs $445 to $4,450 per project.

• Granite: Granite sinks offer a luxury look for $670 to $2,780 per project.

• Fireclay: Fired at high temperatures for extreme durability, fireclay sinks cost $670 to $1,560 per project.

Plumber Pro Costs

When you need a new sink or a quick repair in Seattle, WA, we recommend hiring a local plumber to ensure a leak-free setup. Plumbers in Seattle, WA, charge between $55 and $221 per hour for their labor. Your total labor costs depend on the complexity of the job, such as modifying pipes or cutting countertops. Hiring a professional protects your home from water damage, making this investment worthwhile for your peace of mind.

Licensing

Before hiring a sink installation professional, verify they hold the required plumbing license for Washington or Seattle, and ask for proof of liability insurance and workers' comp if they have employees. Hiring an unlicensed sink installation professional can leave you with little protection if something goes wrong and may make it harder to recover payments or hold them accountable. To verify the type of licensing required, visit the Washington government's official licensing board website for more information.

Why You Should Hire a Sink Installation and Repair Pro

Hiring a sink installation pro in Seattle, WA adds value to your home while saving you hours of labor. Letting an expert handle the heavy lifting keeps your plumbing safe from costly water damage.

• Professionals carry specialized tools like basin wrenches to ensure secure connections without damaging fixtures.

• An expert understands local Seattle, WA building codes, guaranteeing your plumbing meets municipal regulations.

• Contractors correctly seal drains and traps on the first try, preventing hidden leaks behind cabinets.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We’ve surveyed thousands of real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.