Keep your local building department happy
Complete siding replacement requires a siding permit in most municipalities because the work involves removing old materials and installing new exterior protection.
Siding replacement costs range from $11,450 to $40,000, with material choices like vinyl, wood, or brick significantly affecting your total project expense.
You can confirm whether your project needs a permit by calling your local building department and describing the scope of work in detail.
Hiring a local siding repair professional simplifies permit applications and ensures your installation meets building codes, helping you avoid violations and costly rework.
Nothing puts a damper on refreshing your home’s exterior like red tape from your building department, so if you’re wondering if you need a permit for siding replacement, it’s a good idea to confirm before you start the work. In most cases, you will need a permit if you’re replacing your siding, but there are some scenarios where you won’t need one.
For complete siding replacement, which involves removing your old siding and installing new siding, you’ll almost always need a permit. Permits help your building department keep track of home improvement projects and confirm that you or your contractor are doing work that’s up to code.
While filing for a permit might seem like unnecessary red tape once your siding reaches the end of its life, the process will really just help ensure your siding goes up safely and can adequately protect your home from the elements.
Below are some scenarios where you’ll need a permit for siding work.
You’re removing your old siding and replacing it entirely.
You’re doing a partial siding replacement, and the area you’re re-siding is more than 10 square feet (actual square footage depends on your local building department).
You’re installing a heavier siding material, like stucco, and you need to make structural changes to your home to support the added weight.
One additional consideration to make is whether or not you’re in an HOA or incorporated village. Even if permits are mandated for your project, you may be subject to approval by these governing bodies.
On the other hand, you may not need permits for the following siding projects.
You’re installing new cladding or siding directly over your existing siding.
You’re just replacing small sections of your siding (under 10 square feet is the common cutoff for not needing permits).
You’re making cosmetic changes to your existing siding, like painting or putting a skim coat over stucco.
It’s never a good idea to skip the permitting process and just move forward with replacing your siding. If your building department finds out, you’ll almost certainly face violations that come with fines. In the worst-case scenario, your building department may require you to remove the siding and start the process over with the proper permits.
Permits can actually be quite expensive. Talk to your contractors before starting your project to understand how much the required permits will cost you.
You can confirm whether or not you need a permit by calling your local building department to ask. Describe the project in as much detail as possible to get an accurate answer. On the other hand, a siding installer or a siding repair pro near you will be familiar with local laws, and they’ll be able to confirm if you need a permit. A reputable professional will also pull the permit for you and schedule any necessary final inspections to close out the permit after the work is done.
The guys at PaveWay are top notch. From the estimate to the job being completed,all was done in a timely and professional manner. I myself was a DOT Engineer Inspector(know what to look for) and got to talking with Cameron and he himself was a Contract inspector for a few years,same job as...
All Star Paving and SealingI highly recommend KTM construction! I will look no where else for anything that needs to be done, in or out side of our property. The level of craftsmanship is 5 star service across the board! The level of detail, knowledge and professionalism is 5 star service across the board! Ken is a...
KTM Construction, LLCI purchased the "Big Deal": $199.00 for exterior pressure-washing of one- or two-story home up to 2,000 square feet. They cleaned the siding only. I wasn't aware when I bought the Big Deal that they would not do any other surfaces other than the siding (i.e. sides of the gutters or stucco). I...
Complete Home ServicesThis brownstone is historical and the carpentry work is very detailed. I was very happy to secure a company in NY and living in OH to complete the request. Wood work on this brownstone has been existing since approximately 1888 and West side did a GREAT JOB. I will not be able to...
Westside Home ImprovementNice group of workers, very friendly. Day 1 covered everything before starting, seemed very organized. Things seemed to be going great. Day 2 they didn't show up until around 10:00a.m. and work crew was cut in half, was told they had another job. Day 3 they didn't show up until around...
CertaPro Painters of ColumbusThe work went great! Couldn't ask for better. Joel set a work start date. About the time of the storms that may have been associated with Sandy. He was half a day late. They set up on a Thursday. On Friday they had a full crew at work. By Monday they were finishing up. Now, the best...
NJW ConstructionA few months ago, a tree branch fell across my car, leaving a series of dents across the hood and driver's side fender. I took it to Rife's after reading the Angie's List reviews. Rife's did a great job! My car looks like new. And they made the process as easy as possible. When I came in...
Rife's Autobody IncI received an email from Angie's List offering Car Detailing 4 U's services for $99. Coming from Angie's List, I expected this to be a highly dependable and qualified company that was known for doing exceptional work. I set the appointment for them to come to my home. They were arrive at...
We first had Mark fix the back patio and liked his work so much we had him make a brick patio on the side of the house. When we decided to change our concrete walkway to brick, we wanted Mark to do the job because his prices were fair and he did such good work on t he other two projects.
Mark Monnette MasonryI was very pleased with the cost and end result. I truly expected this job to cost me 50% more than it did. When you factor quality and cost, I would highly recommend Mark's services and plan to use him in the future. The best part was, I asked Mark to match the paint color in one section...
Fresh Touch Custom Painting Inc.From average costs to expert advice, get all the answers you need to get your job done.
Find out the true cost to install T1-11 siding on your home. Get detailed price breakdowns, installation tips, and ways to save on your siding project.
Aluminum siding costs between $4,500 and $19,000 on average, depending on the style, square footage, and local labor rates. Keep reading to estimate your budget.
New siding can boost your home value, energy efficiency, and curb appeal. Learn about the cost to install shingle siding to budget appropriately.
Want to learn how to install vinyl siding on a house? Keep reading for insight into the whole process from start to finish.
Learn how to hire a metal siding contractor with confidence. Find qualified pros, ask the right questions, and protect your home investment.
Learn the pros and cons of metal siding in this comprehensive guide. Learn how long metal siding lasts, its cost, and whether or not it's right for your home.
