Need extra clearance for getting your vehicles into your garage? Find out how much it costs to convert two garage doors to one double door in this cost guide.
How to Program a Garage Door Remote in Under 5 Minutes
Set up your garage door remote in just three easy steps
Photo: SBDIGIT / E+ / Getty Images
Photo: SBDIGIT / E+ / Getty Images
SKILL LEVEL
Easy
COMPLETION TIME
5 minutes
COST
Up to $25
Get quotes from up to 3 pros!
Enter a zip below and get matched to top-rated pros near you.
Long gone are the days of getting in and out of the car to manually lift and lower your garage door. Now, you can press a button on the wall of your garage or program a remote to open and close it with the click of a button, from inside your car.
But how do you program a garage door opener, and does the process vary by brand? We’ll dive into these steps below.
How to Program a Garage Door Remote
Photo: mirsad / Adobe Stock
Programming a garage door opener to a remote is easy. Make sure you purchase a remote of the same brand as your opener—or purchase a universal remote.
The steps are pretty standard regardless of brand and model, but you can always reference the user’s manual if the garage door remote setup steps below don’t work for you.
Access and Press the Opener’s “Learn” Button
To get up to your garage door opener, you’ll probably need a ladder. Most garage door openers hang from the middle of the ceiling in a garage.
Once atop the ladder, look for your garage door opener’s “Learn” button. If you don’t see it, remove the light cover (the piece of plastic covering the light bulb).
Press and hold this button until it starts blinking.
Press the Button on the Remote
Either from the ladder or once you’ve climbed down and off it, press a button on the remote. There may be multiple button options, that can accommodate multiple garage doors, so make sure you select the button you’ll want to use to operate this specific garage door.
You have roughly 30 seconds to press this button. If you’re worried about safely descending the ladder in that timeframe, or pressing the button while standing on the ladder, have a helper hold the remote below and press the button for you.
Wait for the garage door opener to either flash or make a clicking noise. This should indicate that the remote and mounted opener are now connected.
Test the Remote
After a few moments, test your work by pressing the button. If the garage door responds to the button presses, your work is done. Put the ladder away, and place the remote in your car (or wherever you would like to keep it).
If you have multiple openers for a larger garage, you will repeat this process, but use a different button on the remote, to program any remaining openers.
If you run into issues with pairing the remote and suspect something might be wrong with the garage door or the opener itself, contact a local garage door company for further assistance.
Frequently Asked Questions
The homeowners guide to garage door services
From average costs to expert advice, get all the answers you need to get your job done.
This guide will help you determine the true cost of installing garage door openers. You’ll need to consider type, horsepower, and other factors.
Your home's garage door cable repair cost depends on several factors, including the cost of other damage that may be the result or the cause of the failure.
Garage door springs are essential for smooth and safe door operation. This guide will help you learn about the different types, their benefits and drawbacks, and the ideal use for each spring type.
If your garage door isn’t closing right, it might be time to align your sensors. Learn how to align garage door sensors in nine easy steps.
Knowing the differences between chain vs. belt drive garage door openers can help you make the right choice for your garage. Keep reading to learn more.