How Much Does It Cost to Install a Gate in Chicago, IL? [2026 Data]

Normal Range: $798 - $3,409

Driveway gate service costs depend on your project and location. Check with a local pro for your specific job.

Get quotes from driveway gate pros near you
No obligation · 100% free
Get quotes from driveway gate pros near you
No obligation · 100% free
Cost Insights
  • Homeowners can expect to pay $205 to $6,215 for gate installation, depending on the gate's size and features.

  • Gate size, material, and automation have the biggest impact on cost, with security and driveway gates costing more.

  • Budget for labor, permit fees for taller or automatic gates, old gate removal, and features like keypads or automatic openers.

  • Hiring a local Chicago gate installation contractor helps ensure your gate is installed properly and provides lasting security.

Chicago’s higher labor costs and limited outdoor construction season push prices for installing a new gate above the national average. The average Chicago gate installation cost ranges between $798 and $3,409, with most homeowners paying around $2,054, depending on factors like gate size, material, automation features, and labor costs. Here's what to expect when budgeting for gate installation in Chicago.

Gate Installation Cost Factors 

Here are the main factors to consider when planning for the cost of gate installation in Chicago, IL.

Size

Most gate sizes are about 4 to 8 feet wide, but costs depend on whether you need a small backyard gate or a driveway gate wide enough to accommodate a car, truck, or RV.

Gate Size (Width)Gate FeaturesGate Cost
4 feetIdeal for yard or garden$205–$415
8 feetLarge enough for double-swinging doors$415–$830
10 feetCommon for driveways$1,035
12 feetAlso popular for driveways$1,035–$3,110
14 feetGood for security$1,245–$3,730
16 feetGreat for security$1,555–$4,145
18 feetExtra-wide, will accommodate RVs, agricultural equipment, or animals$2,070–$6,215

Materials

Vinyl is considered a less expensive gate option, but it’s not as durable as more expensive metal alternatives, like wrought iron or steel. Wood is one of the most popular options for gates and fences.

MaterialAverage Cost
Wrought Iron$1,555–$5,180
Wood$415–$8,805
Chain-link$205–$1,035
Iron$620–$8,805
Steel$620–$8,805
Aluminum$2,070–$8,805
Vinyl$205–$1,035

Type

Gate prices vary widely based on the type of gate. You might need an automated sliding gate for a driveway, but a simple, manual gate will suffice for the garden or backyard.

  • Security gates: $3,110–$12,430. Their higher cost is due to the added height and extras such as cameras, keypads, motors, and intercoms.

  • Automatic driveway gates: $1,970–$6,215, up to $12,430 with advanced home security features.

  • Manual driveway gates: $310–$1,245. These are more affordable since they lack automation and complex parts.

  • Walk-in gates: Around $205. They’re typically lower cost thanks to manual designs with simple latches.

  • Privacy fence gates: $205–$12,430. Taller privacy fence designs increase cost and may be subject to local height restrictions.

Gate Pro Costs

Hiring a professional gate installation contractor makes up a significant portion of your gate installation cost, but it’s the best way to ensure your gate is installed properly, operates smoothly and safely, and stays secure for years to come. Here are the main factors that impact the labor charges on your final bill.

Local Labor Rates

On average, a Chicago gate installation contractor charges $50 to $55 an hour for fence construction and gate installation. If you're hiring a contractor to install a single gate, budget for roughly 4 to 6 hours, depending on the complexity of the installation and whether the contractor is picking out the gate for you at a local hardware store.

That means you could spend between $200 and $330 on labor. A contractor may also charge you for the initial consultation and/or removal and disposal of the existing gate.

Permits

You generally don’t need a building permit to install a gate in Chicago unless it’s part of a fence that’s higher than 5 feet tall. If you’re installing an automatic gate, you’ll need a separate electrical permit. Additional permissions and restrictions apply for homes within a designated historical district. Check with your contractor to see whether permitting is required and if permit fees are included in your estimate. 

Also, if your home is in an HOA neighborhood, always check with your HOA to see if there are additional requirements or permissions needed before scheduling your project.

Licensing and Insurance

Chicago requires contractors to hold a valid City of Chicago general contractor license, and all electrical work for automatic gate installations must be done by a licensed electrician. Reputable contractors should also carry general liability and workers' compensation insurance to protect both of you in case of any accidents or injuries during the job.

Taxes

Your new gate, along with any other materials used during the installation, is subject to the Chicago combined sales tax rate of 10.25%. Your contractor will typically factor these expenses into your estimate. 

Does Installing a Gate Increase Home Value?

The ROI of installing a fence is significant. A new fence can increase your Chicago home’s value by anywhere from 30% to 70%, or about 50% on average. However, without a gate, all that added privacy and curb appeal comes at the expense of convenience, which may leave a negative impression on certain buyers. 

Whether it’s a quick exit to the alley for taking out the trash, easy entry to a backyard for outdoor entertaining, or simply a way between the front and backyard, a gated fence fits far more lifestyles than one with no way to get through. 

The ROI of installing a driveway gate offers a similar average of 50%, though this is often seen as an attractive luxury feature rather than a must-have. 

In any case, while a new gate won’t directly impact your home’s value on the Chicago market, it can still help maximize the pool of interested buyers, potentially leading to more competitive offers.

How Angi Gets Its Local Cost Data 

To help homeowners plan their next project, Angi provides readers with carefully researched cost data and upholds strict editorial standards. We start with national average project costs, which we collect by analyzing competitor information, retailer material costs, and input from professional contractors. We then apply local price index data to calculate location-specific estimates that reflect what homeowners typically pay in their local area. To do that, we use data from the U.S. Bureau of Economic Analysis (BEA), including its Regional Price Parities (RPPs), which measure price differences across cities. This helps us account for differences in labor, materials, and overall cost of living, so estimates in higher- or lower-cost areas better reflect real-world local pricing.

Every estimate undergoes a thorough editorial review to verify accuracy, consistency, and alignment with observed market conditions.

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.

Need professional help with your project?
Get quotes from top-rated pros.

The homeowners guide to driveway gate services

From average costs to expert advice, get all the answers you need to get your job done.