
A heat pump is an eco-friendly heating and cooling system that can save you money on utilities each month. Find out the cost of a heat pump with this guide.
Furnace repair costs in New York City are $368 on average. The final cost depends on the furnace type, which part needs repair, and labor rates in your area, so the final price will range from $167 to $569. Reach out to a local HVAC pro for an accurate estimate.
The type of furnace repair you need is the most impactful cost factor, although the type of furnace you have will affect your costs, as well.
Most homes in New York City use natural gas or propane for heat, and these types of furnaces are more costly to repair than less common electric furnaces.
The cost of living in NYC is well above the national average, which translates to above-average labor costs for furnace repairs.
Your furnace goes through a lot of wear and tear in the cold New York winters, so consider scheduling routine maintenance while you have your tech on site.
Furnace repair costs in New York City average $368, and most residents pay somewhere between $167 and $569. Your cost will depend mostly on the specific repair you need, but the type of furnace you have can also play a part in determining your total. The local cost of furnace repairs is well above average due to the high cost of living in the city, especially for more time-intensive repairs.
Furnace repair costs in New York City can range from as little as $90 all the way up to $1,200 for more involved repairs. The specific component that needs repair or replacement will largely dictate where in this range your total falls, but other factors, like add-on services and local labor costs, will also affect your pricing.
Regardless of their fuel source, furnaces are complex appliances that have a lot of moving parts. Some of those parts significantly influence furnace repair costs, while others are simpler and less costly to repair.
Here is the average furnace repair cost based on the part:
Furnace Part | Average Cost |
---|---|
Burners | $170–$520 |
Blower motor | $170–$2,300 |
Circuit board | $230–$700 |
Coils | $700–$2,300 |
Combustion chambers | $120–$700 |
Draft inducer motor | $230–$1,800 |
Flame sensor | $170–$300 |
Flue pipe | $460–$1,000 |
Furnace filter | $50–$150 |
Gas valve | $230–$700 |
Heat exchanger | $120–$1,800 |
Ignitor | $170–$580 |
Relay switch | $170–$350 |
Thermostat | $120–$700 |
Transformer | $120–$200 |
Most homes in NYC use either natural gas or oil for home heating purposes. Electric furnaces are rare but present in the city. If you use electricity as your main heating fuel source, you’ll never see the need for certain repairs, like those related to flame sensors, gas valves, flue pipes, or combustion chambers.
A furnace requires regular maintenance in order to operate efficiently. Otherwise, dust and other debris can clog burners, the pilot light, and other parts, causing more wear and tear on the system. The long, cold winters in NYC mean most homeowners will call on their furnaces constantly for months straight, and this heavy usage will lead to breakdowns and inefficiencies more often. It’s a good idea to schedule an inspection and sign up for annual maintenance while you have your tech on site to ensure ongoing functionality.
A furnace inspection costs $80 to $100 on average, and you need to schedule an inspection at least once per year to keep your system running smoothly. An advanced inspection, which includes cleaning and a tuneup, costs $125 to $200.
Additional maintenance costs include filters and air duct cleanings. You need to replace the filters once every 90 days, which will cost $4 to $140 per year. Schedule duct cleanings every three to five years, and expect to spend $275 to $500 for the cost of cleaning air ducts.
HVACs are one of the most complicated and essential systems in our homes. To avoid further damage or safety risks, always hire a certified HVAC specialist to repair or replace broken parts.
Furnace repairs cost $50 to $150 per hour for the labor, plus you’ll need to budget for the cost of parts. Small repairs may be billed at a $100 to $200 minimum rather than by the hour.
One of the quickest repairs is to replace a dirty filter, which only takes a few minutes and is easy to DIY. Some of the more difficult, time-consuming parts to repair include the blower motor, the draft inducer motor, coils, and the heat exchanger.
When you hire an HVAC professional in New York City, you can expect between 40% and 90% of your total repair cost to go toward labor, which means an average of between $150 and $330. This is well above the national average, in large part because the cost of living in NYC, which affects local labor costs, is 75% higher than the national average.
Most HVAC repairs won’t require permits in NYC, which means you won’t need to account for permit fees when budgeting for your repair. If you need a major repair or a complete furnace replacement, you’ll need to pay a permit fee of $130. You can ask your HVAC tech if your specific repair demands a permit.
You should also account for sales tax for the most accurate estimate possible. The sales tax rate in NYC, including state and city taxes, is 8.88%, which means taxes will add an average of $32.68 to your total. Taxes can sit much higher for more involved repairs.
Furnace repairs won’t make your home more valuable, but they can help avoid reductions to your value. Buyers expect a home’s mechanicals to be in working order, so they may offer less if your furnace needs repairs that the buyer will then need to pay for after closing.
If your HVAC tech recommends replacing your furnace rather than repairing it, you’re more likely to see an increase in home value. Furnace replacement provides a return on investment (ROI) of 30%, so your home value should increase based on the total cost of the replacement.
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We’ve surveyed thousands of real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
From average costs to expert advice, get all the answers you need to get your job done.
A heat pump is an eco-friendly heating and cooling system that can save you money on utilities each month. Find out the cost of a heat pump with this guide.
Find out the average baseboard heater installation cost, key price factors, and ways to save. Get transparent, expert-backed estimates to plan your project.
If your furnace is malfunctioning, it could be a faulty control board. Find out what a furnace control board replacement costs for parts, labor, and more.
You know filters, fans, and compressors, but do you know what a condensate drain line is? Discover how a small pipe safeguards your AC unit and home from major issues.
The pros and cons of fiberglass air filters reveal whether this wallet-friendly option can clean the air enough for you to breathe easily.
This guide goes over the pros and cons of radiant floor heating, an energy-efficient alternative to traditional radiators and forced air heating systems.