How Much Does It Cost to Repipe a House in Orlando, FL? [2026 Data]

The cost to repipe a house in Orlando, FL, averages to around $7,605, but it can range between $1,521 and $15,210. The main factors that affect the price are the size of your home and the type of materials used. It’s important for homeowners to invest in piping that can withstand Florida’s hardwater conditions. Another factor that can increase the cost is the number of fixtures you have in your home. This guide explores the factors that affect the cost to repipe a house in Orlando so you can budget accordingly.

House Repiping Cost Factors 

Many factors will determine what you’ll pay a pro to repipe a house in Orlando, FL, including the type of materials, pipe size, accessibility, and soil conditions. Florida’s sandy soil can be difficult to work with and requires specialized bedding materials to support the new pipes, which can increase the cost. PEX piping is a common choice for Orlando homes due to its resistance to acidic soil and hard water. Homeowners can save on costs by opting for PEX piping, which is 30% to 40% less than copper piping.

Speak with a pro to learn which materials are best for your home and budget. That said, here’s a breakdown of the various factors and their cost ranges.

Size

Large homes have more plumbing fixtures and require longer runs for pipes and drain lines, so they cost more to repipe. Additionally, multistory homes cost more to repipe than single-story homes because you'll need more piping material to reach plumbing fixtures between floors.

Materials

There are three main types of piping materials: copper, CPVC, and PEX. Costs vary with the material. For instance, copper ranges from $2 to $8 per linear foot, while CPVC costs around $1 to $2 per linear foot. 

Remember that local codes can dictate the types of pipes you can use. Your plumber can recommend the best material for your home.

Number of Plumbing Fixtures

Proper piping is required for all of your home's fixtures, including toilets, sinks, and showers. The more fixtures you have, the more piping you'll need. Rough-in plumbing for a bathroom is costly, as getting pipes to precise locations is more labor-intensive than running plumbing behind walls. If you’re changing your home’s layout, expect to pay more for the total cost.

Diameter of Piping 

The size, or diameter, of your pipes also affects costs. Pipes used for waste drainage are wider than pipes designed to carry water. For the same type of piping, larger diameters will be more expensive. However, most drain lines consist of PVC, which is less expensive than copper, so drainpipes should still be more affordable than water supply lines.

Accessibility

If your pipes are in a difficult-to-reach location, expect to pay more for repiping your house. For example, pipes under concrete are more difficult to access than pipes behind drywall, so they cost significantly more to remove and replace.

Inspection Cost

If your municipality requires a permit for repiping, you’ll need an inspection after the work is done to ensure everything is up to code. In most cases, the initial inspection cost is included in the permit fee. However, reinspection in Orlando costs around $50 to $150 if an issue requires it.

Soil Conditions

The soil around your home can also affect the cost of repiping. For example, clay soil shifts over time, affecting the surrounding plumbing and leading to more costly installations. This is only a factor if you replace buried lines, like water mains, underground pool lines, and sprinkler lines.

Plumbing Pro Costs

The amount it’ll cost to hire a professional plumber in Orlando, FL, depends on their experience, material costs, and permit fees. You’ll need to ensure you include all these factors in your budget when hiring a pro. Here’s how much you can expect to pay for labor and the permits that are required to perform the job legally.

Labor

Labor can account for 60% to 70% of the project’s total cost, and pros may charge by the job or by the hour. Plumbers in Orlando, FL, cost around $45 to $200 per hour, depending on their experience and the complexity of the job. For example, a master plumber has the highest level of education and experience in complex tasks, so they can command a higher rate. However, it’s crucial to hire a licensed plumber with the experience needed to do the job correctly.

Permits

According to the Orange County Office of Management and Budget, the price for a permit to repipe a house in Orlando can range from $50 to $500 and depends on the number of fixtures and the total valuation of the project. The more fixtures you have, the costlier the permit. 

All permits and inspections should be handled by a pro, and the cost should be included in your quote. However, it’s best to ask the pro to confirm that everything is included in the estimate and ensure that the work complies with local regulations.

Add-On Services and Additional Pros to Consider Hiring

Since you're updating your piping, it may be time to replace the main water line and the water heater in your home if they’re outdated. These tasks are usually tackled during this project since you already have a licensed plumber on hand. Water line replacement costs between $255 and $760, and the process involves trenching your yard, which will destroy your lawn. So you may want to hire a professional landscaper to restore your yard and make it lush again.

Here are a few additional pros you may need to hire to assist in completing these projects:

• Water heater installation cost: $45–$200 per hour

• Foundation repair contractor: $150–$200 per hour

• Landscaper cost: $50–$100 per hour

• Driveway contractor: $50–$150 per hour

• Tree removal service: $150–$2,000 per tree

Does Repiping a House Increase Home Value?

While there isn’t a specific return on investment for repiping your home, buyers expect functional plumbing when they purchase a home. Since old piping is common in Orlando homes,having a pro repipe your house can make it more marketable by preventing problems during home inspections and reducing the risk of losing a potential buyer's interest. Plus, replacing old piping with PEX can help prevent leaks and low water pressure.

How Angi Gets Its Local Cost Data 

To help homeowners plan their next project, Angi provides readers with carefully researched cost data and upholds strict editorial standards. We start with national average project costs, which we collect by analyzing competitor information, retailer material costs, and input from professional contractors. We then apply local price index data to calculate location-specific estimates that reflect what homeowners typically pay in their local area. To do that, we use data from the U.S. Bureau of Economic Analysis (BEA), including its Regional Price Parities (RPPs), which measure price differences across cities. This helps us account for differences in labor, materials, and overall cost of living, so estimates in higher- or lower-cost areas better reflect real-world local pricing.

Every estimate undergoes a thorough editorial review to verify accuracy, consistency, and alignment with observed market conditions.

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.