Wood-burning Fireplace

Some homes with wood-burning fireplaces don't have ash pits due to design choices, construction practices, or the age of the house. Many older abodes don't have them because ash pits weren't a standard feature when they were built. Additionally, in smaller homes or homes with less frequent fireplace use, builders might have opted to forgo an ash pit to reduce costs or simplify maintenance.

Compared to certain types of firewood like pine or spruce—which burn off sticky resin contained within the wood that creates lots of smoke—elm isn’t the worst option for burning in a fireplace.

Because elm wood is dense, it burns at a moderate pace and does a pretty good job of keeping your home warm. Hardwood like maple or oak may perform slightly better, but elm isn’t a bad choice overall.

The best location for a wood stove depends on your home's layout and venting options. For optimal heat distribution, a central location on the ground floor, such as the living room, is often recommended. If you have an existing, functional chimney, installing the stove there can simplify the venting process. Alternatively, placing the stove near an outside wall can make it easier to route a new chimney through the roof. For safety, ensure no combustible materials are near the stove. Building codes typically require 20 to 36 inches of clearance between the stove and any side walls.

Yes, it is possible to convert a wood-burning fireplace to gas. The average cost for this conversion is $3,000, with a typical range of $500 to $5,500. The project involves running a gas line, professionally cleaning the chimney, and installing gas logs.

Cost factors include the type of gas fireplace and whether a new gas line is needed. Installing a natural gas line can add $200 to $1,000 to the cost. Vented gas fireplaces are more expensive, averaging around $5,000, while ventless options are more cost-effective at about $1,500.