Get matched with top asphalt driveway pros in Glen Daniel, WV

There are quite a few differences between concrete and asphalt. Concrete is more costly up front and more challenging to repair. Asphalt does better in cold climates and works well with radiant heat systems. Porous asphalt is also excellent for wet climates, as it allows the water to drain away. However, it does get unpleasantly hot in the summer and requires more maintenance than concrete.

In most cases, you don’t need a permit to repave your driveway, although some exceptions exist. If you’re widening your driveway and plan on widening the apron as well, you’ll usually need a permit from the Department of Transportation in your area. This permit costs between $50 and $300 in most cases. Most municipalities will also require a certified and insured contractor do the work relating to the apron and curb cut. You can contact your building department or ask your paving company if you need a permit. Your driveway professional will usually pull the permit for you.

The main difference between asphalt and blacktop is that asphalt has a lower ratio of bitumen—a low-grade tar-like crude oil—than blacktop. While blacktop is heated to 300 degrees or more, hot-mix asphalt is heated to a lower temperature, typically between 275 and 300 degrees Fahrenheit. Consult an asphalt driveway professional about which type of material is the best fit for your future asphalt driveway.

Yes, it is possible to pave over an existing driveway depending on the existing condition and type of material you plan to use. Factors to consider include current driveway condition, compatibility of the new material, thickness, surface prep, and driveway height.