Top-rated ceramic tile pros.

Get matched with top ceramic tile pros in Westby, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your ceramic tile service project in Westby, WI?

Select your specific project to find the pro for you.

Find Ceramic tile pros in Westby

Avatar for Affordable Home Remodeling
Affordable Home Remodeling
4.1(
45
)

Serving Westby, WI and surrounding areas

In business since 2020

Free estimates

Emergency services offered

"I hired Affordable Remodeling to replace the flooring in the living room, kitchen and 2 bathrooms. Also to replace the countertops in the kitchen and 2 bathrooms, to build and replace the main bathroom vanity, to replace 3 toilets, and to put up a backsplash on one of the kitchen walls. Silas, my main contractor did a wonderful job on everything!! Very pleased with his workmanship and the outcome of the remodeling project."
Response time1 day
Response rate97%
Recommended by62%of homeowners
Avatar for United Tree service
United Tree service
5.0(
3
)

Serving Westby, WI and surrounding areas

In business since 2012

Free estimates

Emergency services offered

"Untied tree service came and helped during a bad storm when no one else would. They were prompt and helpful, friendly and professional. Safety minded and goal oriented. Affordable and reliable. Jose and Emmanuel were amazing to meet. They saved my yard and house!"
Additional Photos
Additional Photos
Additional Photos
Recommended by100%of homeowners
Showing 1-10 of 23
Ceramic Tile questions, answered by experts

Yes, you can tile over existing tiles in a bathroom, but it is not always recommended. For this method to be successful, the original tile surface must be clean, flat, and free of damage such as cracks, unevenness, mold, or mildew. While tiling over existing tiles can save time and money, there are potential drawbacks. The new adhesive may not bond properly, and the process adds extra weight to the wall or floor. Additionally, the increased height of the surface could interfere with door clearances. For the best and most durable results, removing the old tiles before installing new ones is generally the better option.

Add a T-shaped spacer to each corner of a tile when placing it. You’ll want to nudge the tiles closer together so the spacers are touching each corner. When you’re done installing your tile, you can remove each spacer, wash them, and use them for your next project.

It’s best to install a shower door after the bathroom tile is in place to ensure you have accurate measurements. If you try installing a shower door first, the tile might be too thick to install afterward, or the tile will be too thin and create a gap between the shower doors that allows water to leak. With the tile in place first, you’ll know the exact shower door size that you need.

You can, in theory, tile your fireplace hearth with most tiles. However just because you can, doesn’t mean you should. For example, it’s much better to use unglazed tiles because glazed tiles are more resistant to cracking under extreme heat. Porcelain is more heat-resistant than ceramic, but you can still design the hearth as you like by putting the most heat-resistant tiles directly under the fire and, if it matches your style, add more decorative tiles further from the center of the fire. 

The best trowel for penny tile is a 3/16-inch-by-5/32-inch V-notch trowel. Because of the small size of the penny tile, you want a trowel with small notches that can lay a thin layer of mortar on the surface you’re tiling. If the notches are too wide, you risk applying too thick of a layer of mortar, and it can squeeze out between the penny tiles.

The Westby, WI homeowners’ guide to ceramic tile services

From average costs to expert advice, get all the answers you need to get your job done.