Get matched with top gate repair pros in Onalaska, WI

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

Double gates come with the same gaps as single gates, with hinges taking up a quarter of an inch of space. The difference is that double fence gates also have a center gap, which needs a little more clearance. Space the center gap at half an inch instead of the usual three-eighths of an inch for a single gate. 

Yes, you can convert manual gates to electric operation. Installing a motor and an opening device from a kit allows you to convert any gate so it can open and close automatically. Be sure to buy the correct type of opener for your gate style. For example, some openers are specific to swinging gates, while others are for sliding gates. Get familiar with your swinging or sliding gate parts before you go shopping to avoid having to return to the store for the correct opener.

Gates are often stuck halfway due to physical blockages or damage to the rollers, wheels, or tracks the gate runs on. Check to make sure there are no obstructions before considering that the motor might be burned out or malfunctioning somehow. Hopefully, the issue is simple, and you can remove it with a broom or your hands, but if your gate is stuck and there's no obvious reason why, you should call a pro to diagnose the issue.