What is a good CFM for a range hood?

• <div><p>Most residential range hoods have a CFM between 200 and 600. A higher CFM means your range hood is better at removing smoke and odors from your kitchen. The measurement ultimately depends on your stove’s width and heat output as well as the size of your kitchen. </p><p>Compared to the average size of a stove and kitchen, 350 CFM would be the minimum recommended rating for the average kitchen. However, selecting a higher CFM range hood would guarantee better ventilation to match your cooking habits, whether they’re minimal or extensive.</p></div>

Can any microwave go over the range?

• <div><p>No, you can’t install just any microwave over your range. You have to get a specific type of microwave known as an over-the-range unit. These include venting and lighting features that you’ll need above your stovetop. </p><p>Although countertop units are more affordable, they won’t work for this type of installation. To avoid hazardous conditions in your kitchen, buy the right type of microwave for your needs.</p></div>

Get matched with top chimney cap pros in Kimberly, WI

Q: Do range hoods need to be vented outside?

• <div><p>No, range hoods do not necessarily have to be vented outside. Ductless or non-vented range hoods are available, which are common in condos or small kitchens where connecting to external ductwork isn't feasible. These hoods operate by taking in air, filtering it through charcoal filters to help eliminate smoke and odors, and then recirculating the cleaned air back into the kitchen. However, while these recirculating hoods are more versatile, venting to the outside is still the preferred and more effective method for completely removing smoke, odors, and gases from the room.</p></div>

Q: Who do you hire to install a range hood and ducting?

• <div><p>You should contact a local range hood installation professional to install your range hood and do the ductwork. Prices range from <b>$50 to $100</b> per hour, with the total number of hours required varying based on the project complexity. Simple installations might take an hour or two, while more complicated ones can take four hours or more.</p></div>

Q: Can professionals advise on the best range hood for my kitchen?

• <div><p>Yes, they can assess the size, kitchen layout, and ventilation requirements to make recommendations.</p></div>

Q: Can any microwave go over the range?

• <div><p>No, you can&rsquo;t install just any microwave over your range. You have to get a specific type of microwave known as an over-the-range unit. These include venting and lighting features that you&rsquo;ll need above your stovetop. </p><p>Although countertop units are more affordable, they won&rsquo;t work for this type of installation. To avoid hazardous conditions in your kitchen, buy the right type of microwave for your needs.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your chimney cap service project in Kimberly, WI?

Select your specific project to find the pro for you.

Verified Reviews for Chimney Cap Service pros in Kimberly, WI

*The Angi rating for Chimney Cap Service companies in Kimberly, WI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Chimney Cap Service needs.

*The HomeAdvisor rating for Chimney Cap Service companies in Kimberly, WI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Chimney Cap Service needs.

Last update on April 13, 2025

Reviewed in April 2025
The workers were outstanding and did an extraordinary job, starting at 8 am and finishing the entire job by 3 pm. They cleaned everything up so well and efficiently. The old rusted fake chimney was removed and now the entire roof looks 100% better! Could find no fault with this wonderful...
Brothers Exteriors Solution LLC
Request a quote
Reviewed in November 2021
The end caps all leaked, in the back of the house the rain ran OVER the gutters. After calling them back 3 times to repair, they said it was a "roof" problem. I had another company come out and look, when I told this to Dave he hung up on me- warranty over- Wouldn't return my calls, I had to pay...
BADGER SEAMLESS GUTTERS
Request a quote
Reviewed in July 2020
Roof was installed very timely. We had them tear off a chimney that was no longer needed, replace a skylight and remove several other roof penetrating items. Everything was done timely, with very little damage to our flower beds around the house. Both the foreman, and lead who quoted the...
Armor Shield Metal Roofing
Request a quote
Reviewed in June 2020
The Badger State Roofing crew tore off two layers of shingles, did sheeting and other repairs plus removed an old brick chimney below the roof line, installed on he new roof in one day. Jake did an outstanding job of making sure everything included in the bid was done to my satisfaction. Last...
Badger State Roofing
Request a quote
Reviewed in September 2019
I hired Hands On Enterprise to take the chimney down below the roof line, and then to patch the area of the roof. I felt the work quality was excellent. I say this because the day after the job was completed, we placed card board underneath the area of the repair. Over the next week, we had a...
Hands-On Enterprises, LLC
Request a quote
Reviewed in April 2019
Tim worked with us at every step of difficult repair issues, keeping cost reasonable and making sure the dormer roof and chimney looked great upon completion. He responds to calls and texts promptly. He explained his best solutions as problems continued to arise. The work was completed as...
Hansen Roofing and Repair LLC
Request a quote
Reviewed in April 2018
Justin from A-Blaze Technologies installed a chimney liner in our home, and the work met and exceeded our expectations. Justin was professional, thorough, and a good communicator. He worked with us in a flexible manner to put in the type of liner we wanted, one that maintained the original...
Ablaze Technologies LLC
Request a quote
Reviewed in April 2018
At completion the roof had shingles that were curled. The foreman said they would be flattened. After vacation, we contacted GE and indicated they were still curled. He came back, inspected it and said the roof was great-we paid him. Weeks later another roofer come over to replace gutters and he...
GE Contracting LLC
Request a quote
Reviewed in October 2017
Flashing on a chimney was rusty and leaking. No need for the chimney so came and very quickly got us scheduled and done on planned day. Estimate was less than expected. Prior attempts by others didn't even get a call back let alone the work done. Working on a garage expansion as well,...
ICS Roofing & Siding - Home Facebook
Request a quote
Reviewed in September 2017
Very well coordinated with heating company to replace crumbling chimney with b-vent. Responded immediately to request for quote and very prompt in work.
Overhead Solutions Inc
Request a quote

Find Chimney cap pros in Kimberly

Sullivan Exteriors

4.7(

)

Serving Kimberly, WI and surrounding areas

In business since 2008

Free estimates

"Great! They spent 2 days repairing a poor roofing job that lead to our leaking and a several nests of wasps invading house. They also did a great job cleaning our gutters this spring.

They will be returning next spring for another issue we need addressed.

We were very happy with this company, Ben is very easy to talk with.
"

Recommended by95%of homeowners

Serving Kimberly, WI and surrounding areas

In business since 2005

Credit card accepted

"They did a great job. I was pleased with the service and would use them again."

Recommended by82%of homeowners

Serving Kimberly, WI and surrounding areas

In business since 2002

Free estimates

Emergency services offered

"It was written up to be chimney and foundation check. I wasn't home when he arrived, my husband was, and no foundation inspection took place. He had a couple of good tips, but not very detailed or in depth.
"

Recommended by87%of homeowners

Request Quote

Chimney Caps questions, answered by experts

No, range hoods do not necessarily have to be vented outside. Ductless or non-vented range hoods are available, which are common in condos or small kitchens where connecting to external ductwork isn't feasible. These hoods operate by taking in air, filtering it through charcoal filters to help eliminate smoke and odors, and then recirculating the cleaned air back into the kitchen. However, while these recirculating hoods are more versatile, venting to the outside is still the preferred and more effective method for completely removing smoke, odors, and gases from the room.

You should contact a local range hood installation professional to install your range hood and do the ductwork. Prices range from $50 to $100 per hour, with the total number of hours required varying based on the project complexity. Simple installations might take an hour or two, while more complicated ones can take four hours or more.

Yes, they can assess the size, kitchen layout, and ventilation requirements to make recommendations.

Most residential range hoods have a CFM between 200 and 600. A higher CFM means your range hood is better at removing smoke and odors from your kitchen. The measurement ultimately depends on your stove’s width and heat output as well as the size of your kitchen.

Compared to the average size of a stove and kitchen, 350 CFM would be the minimum recommended rating for the average kitchen. However, selecting a higher CFM range hood would guarantee better ventilation to match your cooking habits, whether they’re minimal or extensive.

No, you can’t install just any microwave over your range. You have to get a specific type of microwave known as an over-the-range unit. These include venting and lighting features that you’ll need above your stovetop.

Although countertop units are more affordable, they won’t work for this type of installation. To avoid hazardous conditions in your kitchen, buy the right type of microwave for your needs.

The Kimberly, WI homeowners’ guide to chimney cap services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Apr 6, 2026Apr 6, 2026
How Much Does a Chimney Cap Replacement Cost? [2026 Data]
Find out the average chimney cap replacement cost, key price factors, and ways to save and budget for your chimney cap project.
Paige Bennett
•
May 30, 2026May 30, 2026
How Much Does It Cost to Seal a Chimney? [2026 Data]
Sealing your chimney is one of the most affordable ways to prevent water from penetrating the bricks. This guide breaks down the cost to seal a chimney.
Barbara Bellesi Zito
•
Mar 17, 2026Mar 17, 2026
How Much Does Chimney Crown Repair Cost? [2026 Data]
The average cost to repair or replace a chimney crown depends on the damage, material, and any other chimney maintenance services bundled into your project.
Deirdre Sullivan
•
Jul 8, 2026Jul 8, 2026
The Six Best Chimney Caps, Including Pros and Cons
We break down the types of chimney caps, including the pros and cons associated with each one, plus additional information homeowners should know.
Jill Harness
•
Jul 9, 2026Jul 9, 2026
What Is a Chimney Cap, and Why Do You Need One?
Not all chimneys have caps, but most fireplaces can benefit from having one. But what is a chimney cap, and why is it important? Our guide breaks it all down.
Amy Freeman
•
Jul 9, 2026Jul 9, 2026
Flue Cap vs. Chimney Cap: What’s the Difference?
Flue cap vs. chimney cap—how do you know which one you need? Learn more about the differences between a flue cap and chimney cap.