Get matched with top woodworkers in Brandon, WI

Q: Do baseboards have to be nailed into studs?

• <div><p>Baseboards don&rsquo;t have to be nailed into studs. However, nailing them into studs adds to their stability. When studs aren&rsquo;t available, you can secure them with drywall nails directly into the drywall and adhesive. Always aim to nail into studs, especially in high-traffic or impact-prone areas.</p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Q: Do you need a cutting board on butcher block countertops?

• <div><p>You don&rsquo;t need a cutting board. In fact, cutting is the original purpose of butcher block countertops. That said, wood is porous and can harbor germs. You&rsquo;ll need to clean your countertop thoroughly after use. Knives can also scratch the surface. This adds to the patina of the wood, but not everyone likes the look&mdash;in which case, you may want to use a cutting board.</p></div>

Q: How can I find ceiling joists using simple tools like a hammer or a nail?

• <div><p>Yes, you can find ceiling joists using simple tools if a stud finder isn't available.</p><p>Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.</p><p>Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.</p></div>

Q: Do contractors charge for meetings?

• <div><p>Most contractors do not charge for meetings, but it can depend on the project, mainly if it includes detailed consultations or project planning. For general estimates, homeowners shouldn't expect to be charged. Always ask up front about meeting fees to avoid surprises and ensure you know what&rsquo;s included in the process.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Brandon, WI?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Brandon, WI

*The Angi rating for Woodworking companies in Brandon, WI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Brandon, WI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on September 22, 2026

Reviewed in September 2026
Great work, professional and efficient bid and completion of work. Highly recommended.
Engel Mechanical LLC
Request a quote
Reviewed in October 2025
Quick and easy repairs done
Torres Garage Doors, LLC
Request a quote
Reviewed in October 2024
The job John and Mick did painting our livingroom and main bathroom was very very good. I would recommend them for painting to anyone.
Kahlhamer Painting, LLC
Request a quote
Reviewed in June 2024
Mike was great and easy to work with. He came out and gave us an estimate within 24 hours and was able to do the project within a few days. We are very satisfied with the work. We had 9 tree stumps that needed grinding including a very huge willow tree with massive roots.
ANGRY BEAVER STUMP REMOVAL LLC
Request a quote
Reviewed in September 2023
Very nice work, and I saw some welding he did for a friend. Very nice work.
Hansens Metalworks and Millwright Service, LLC
Request a quote
Reviewed in September 2023
I would highly recommend Steven he was very prompt in getting me a quote & was able to do the work we needed within four days of the quote. We were so thankful for his work so we were able to continue our home improvement project. If you need tree service I would contact Ultimate Outdoor...
Ultimate Outdoor Bros
Request a quote
Reviewed in May 2023
Excellent tree and stump removal including cleanup. I'm very happy. Marguerite K., Green Lake
Just a Memory Removal Services, LLC
Request a quote
Reviewed in April 2023
As a home remodeling contractor, I need reliable people in order for me to deliver quality projects on time. I got a quick call back, from Andre. We reviewed the project and he sent me a written quote. His crew arrived on the promised date, they were on time and their work was excellent. ...
All Dry Services of La Grange
Request a quote
Reviewed in February 2022
Timely, professional, easy to work with. Lawn always looks nice.
LWB Lawn Service, LLC
Request a quote
Reviewed in November 2021
They did a great job we had 6 trees taken down it like they were never there.
Ross
Request a quote

Find Woodworkers in Brandon

Kitchen Tune-Up Fox Valley

5.0(

)

Custom Cabinets - Build

Serving Brandon, WI and surrounding areas

Approved

In business since 2019

Free estimates

Warranties offered

"Project was refacing installed cabinets and installing a new range hood"

+14

Response time5 days

11 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

Transformation Construction Corp.

5.0(

)

Carpentry Framing - InstallCarpentry Framing - RepairCloset - Build+2 more

Serving Brandon, WI and surrounding areas

Approved

In business since 2016

Free estimates

Customers say: Quality work

"Nathanael's work if of expert quality. He's prompt, tidy, reliable and very honorable. I am so grateful to have found him to do carpentry for a major renovation of our basement. For sure, he will be my go-to guy for future projects."

Before: Looking from Liv Rm to Dining Rm

Before: Looking from Dining Rm to Liv Rm

Response time3 days

Recommended by83%of homeowners

Carpentry Framing - InstallCarpentry Framing - RepairCloset - Build

Serving Brandon, WI and surrounding areas

Approved

In business since 2019

Free estimates

Emergency services offered

"Myron responded quickly, did an awesome job plus extras. was on time each day. Great to work with. Cleaned up well after finishing. if you need plaster or drywall repair he is the guy to go with."

Response time6 hrs

Response rate85%

2 neighbors recently requested a quote

Request Quote

INTEGRITY DECKING COMPANY LLC

5.0(

)

Arbor, Pergola or Trellis - Build Custom

Serving Brandon, WI and surrounding areas

Approved

In business since 2011

Free estimates

Warranties offered

Here at Integrity Decking Co., Integrity is not just a word to us, it?s our standard. We offer a maintenance free composite decking that stands the test of time and stays looking beautiful. Our team is dedicated to providing great customer service every step of the way. We specialize in full replacements, new additions, and refacing projects. If you?re looking for experts to help with your outdoor update, look no further! We?ve got you covered.

+22

52 neighbors recently requested a quote

Request Quote

Kool View Company, Inc.

4.3(

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For Business

Serving Brandon, WI and surrounding areas

Approved

In business since 1973

Free estimates

Warranties offered

"Great to work with. Very happy with the finished project. Would use them again."

+53

Response time2 days

Response rate100%

6 neighbors recently requested a quote

Request Quote

Independent Excavating, LLC

3.9(

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For Business

Serving Brandon, WI and surrounding areas

Approved

In business since 2020

Free estimates

Credit card accepted

"I hired a different business outside of HomeAdvisor"

Response time2 days

8 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

INTEGRITY DECKING COMPANY LLC

4.0(

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For Business

Serving Brandon, WI and surrounding areas

Approved

In business since 2011

Free estimates

Warranties offered

"Integrety decking is a great company. Tony Braker was our sales person and was super helpful in our color decisions. Tyler, Drew, Dacota, the crew that built our new deck were amazing. They were very professional and courteous and they did outstanding work. The Duxback rain shedding product is awesome."

+28

Response time2 days

7 neighbors recently requested a quote

Request Quote

Tys Woodworking

New to Angi

Custom Cabinets - Build

Serving Brandon, WI and surrounding areas

Approved

I’ve done numerous home renovations from hanging drywall, taping/mudding, painting, vinyl flooring, basic electrical and plumbing. I’ve also built a pantry cabinet and cabinets for my van buildout

Request Quote

A&A Construction services

New to Angi

Custom Cabinets - Build

Serving Brandon, WI and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

Hi, my name is Igli. I proudly serve Milwaukee and the surrounding areas, providing quality painting, flooring, and tile installation services.\nNo job is too big or too small! I take pride in delivering quality workmanship, paying attention to detail, and making sure every customer is satisfied. I believe in honest communication, reliable service, and treating every home as if it were my own.\nWhether you're looking to refresh your home with a new coat of paint, install new flooring, or upgrade your bathroom with beautiful tile, I'm here to help.

Request Quote

Big Jons Handyman Service

New to Angi

Furniture - Build Custom

Serving Brandon, WI and surrounding areas

Approved

Hi, my name is Jon. I am retired paramedic. Now doing handyman work. From changing a lightbulb ceiling fan to putting together furniture I have done a little bit of everything.. I do flooring as well. I can tear out carpeting and tile and replace it with laminate. I’m very fair priced.

Request Quote

...

Showing 1-10 of 83

Woodworking questions, answered by experts

Baseboards don’t have to be nailed into studs. However, nailing them into studs adds to their stability. When studs aren’t available, you can secure them with drywall nails directly into the drywall and adhesive. Always aim to nail into studs, especially in high-traffic or impact-prone areas.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

You don’t need a cutting board. In fact, cutting is the original purpose of butcher block countertops. That said, wood is porous and can harbor germs. You’ll need to clean your countertop thoroughly after use. Knives can also scratch the surface. This adds to the patina of the wood, but not everyone likes the look—in which case, you may want to use a cutting board.

Yes, you can find ceiling joists using simple tools if a stud finder isn't available.

Using a hammer requires patience and a keen ear. Gently tap the ceiling in a grid pattern, listening for sound changes. A hollow sound indicates space between joists, while a solid, dull thud suggests a joist. Mark the location with a pencil and confirm by tapping from different angles.

Alternatively, you can use a nail, but this method will leave small holes. You'll feel increased resistance when the nail hits a joist. Mark the spot and repeat the process every 16 or 24 inches to map the joist locations. This method is considered less reliable than using a stud finder.

Most contractors do not charge for meetings, but it can depend on the project, mainly if it includes detailed consultations or project planning. For general estimates, homeowners shouldn't expect to be charged. Always ask up front about meeting fees to avoid surprises and ensure you know what’s included in the process.

The Brandon, WI homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Sep 26, 2026Sep 26, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
René Bennett
•
May 3, 2026May 3, 2026
How Much Does a Cord of Wood Cost? [2026 Data]
Whether you need to heat your home for the winter or simply enjoy lighting a fire occasionally, it's helpful to know the cost of a cord of wood in your area.
Lauren Bongard
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Refinish Stairs? [2026 Data]
Refinishing stairs is a great way to spruce up one of a home's most dominant focal points. High-quality wood should be allowed to shine. Learn the cost to refinish stairs in this guide.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.