Top-rated buffing and polishing pros.

Get matched with top buffing and polishing pros in South Burlington, VT

Enter your ZIP and get matched with up to 5 pros

Need a pro for your buffing and polishing project in South Burlington, VT?

Select your specific project to find the pro for you.

Find Buffing and polishing pros in South Burlington

Buffing and Polishing questions, answered by experts

You can’t change the color of the stone, but you can update granite countertops without replacing them by painting them. Because granite is a porous material, you’ll want to seal them first before painting them so that the paint doesn’t hurt the surface. This is important because you don’t want to devalue your counters by damaging the original surface; even if you don’t like the color now, you or a new homeowner may want to remove the paint someday and return them to their original color. You can also cover them with 

It depends on the material. Sandstone, slate, and granite can be slippery in wet weather. Applying a sealant to the stone can often stop it from absorbing moisture and may reduce the likelihood of slipping. If you're concerned about losing footing, a safer option might be bluestone or concrete.

To remove cloudiness from marble, use equal parts baking soda and water to form a paste. Apply it to the surface, allow it to sit for at least two hours, then wipe with a microfiber cloth. Another option is adding a couple of dish soap drops to warm water and wiping the surface after you’ve applied it to the surface. You may also consider using a liquid stone cleaner.

Buffing is a less expensive and less time-consuming alternative to other floor repair techniques, but it’s only ideal for removing surface-level scratches and damages. Floor-buffing machines work to gently smooth out the floor’s top layer rather than removing it the way that sanding does. 

This process is ideal for gently worn floors, but it won’t have the desired impact on floors with severe damage. On the other hand, sanding fully strips the floor’s top layer so damages beneath the surface are accessible to remove or repair. Since the process is more involved, it requires more time, tools, and experience to achieve the best possible results.

The costs range from $3 to $10 per square foot, depending on the stone type, level of damage, and labor intensity required.

The homeowners guide to home care is here

From average costs to expert advice, get all the answers you need to get your job done.

See all articles