"Seth with Caskey Decorative Concrete did and excellent job on my drive way and side walks? I would highly recommend them for all your concrete needs!!!!"
"Highly recommended! I contracted with Brick Solutions owner, Joe Walls, to have a badly damaged concrete driveway replaced with brick pavers. I had previously gotten estimates for replacing the driveway with new concrete but I was concerned about damaging the roots of a very old tulip poplar tree adjacent to the driveway. When the concrete contractor informed me if he didn?t cut the roots he couldn?t guarantee the concrete but if he did cut the roots he could not guarantee the tree would survive, I decided to go with brick. Joe said he could do the driveway without damaging the roots. He broke up the old concrete with a jackhammer rather than bringing in heavy equipment. We consulted with an arborist who told Joe what could or could not be cut. When our plan to save a portion of the old concrete did not work out because it was too cracked Joe volunteered to break it up and replace it with brick at no extra charge. He worked carefully, followed all out suggestions, and managed to give us a smooth brick driveway that looks much better than what we had before. In short, Brick Solutions did a great job for a reasonable price and it was pleasure to work with Joe.
"Last fall I enjoyed working with Rocky Ridge Paving LLC on a private driveway project, and I cannot recommend them highly enough! From start to finish their professionalism, expertise, and dedication to quality were evident in every aspect of the job. Communication with the owners was exceptional. Evan and Josh listened to my needs and preferences, offering valuable insights and suggestions. Their transparent and clear communication made the entire process smooth and stress-free. I was thoroughly impressed by the skill and efficiency of the Rocky Ridge Paving crew. They arrived promptly and worked diligently to complete the project before the agreed-upon timeline. Their attention to detail was remarkable, ensuring that every aspect of the paving was of the highest quality. I was pleasantly surprised by their commitment to cleanliness and safety throughout the project. They maintained a tidy work environment, followed safety protocols, and worked responsibly. Not only did Rocky Ridge Paving deliver on its promises, but it also exceeded my expectations. The workmanship is top-notch, and I have received numerous compliments on the result. Although a young company, Rocky Ridge sets the standard of excellence in paving. If you are looking for a reliable, professional, and skilled paving company, you have found them. I am beyond satisfied with their services and highly recommend them. Thank you, Rocky Ridge Paving, for a job well done!"
"Guy stayed until the job was completed, he dug out and leveled the ground for a garage. Laid in 25 ton of gravel and poured the concrete. I must say when the concrete was poured he was here until he was satisfied with the job."
Rock-River Engineering is a design company Professional Engineering for your building or remodeling project. We provide solid structural solutions and creative designs modeled with 3D CAD software. We treat our clients and your building site with respect, always striving for an outstanding project.
We are your most affordable "one stop shop" contracting company that provides all of your home maintenance/construction needs. We work with businesses and homeowners providing quality workmanship at reasonable prices. Additional DBA - Gabriel & Gail Better Business LLC & Gabriel and Gail.
We take pride in handling the vast majority of work in house. The few items we may subcontract out are only to contractors we have used numerous times before and know perform at the highest standard. We are just beginning to dabble into financing.
K&M Quality Carpentry, LLC is a privately owned business with more than 20 years in the\nresidential construction and remodeling business. Have been doing business VA, MD, and the\nDistrict of Columbia since 1994.\n• Contractor\nAs your Contractor, we focus on all the project details to ensure a satisfactory outcome\nfor you. We ensure that all permits for each phase of the project meet or exceed state and\nmunicipal building codes.\nK&M Quality Carpentry, LLC serves as a sub-contractor for many General Contractors\nin the area.\nWe pride ourselves on all the projects we undertake and focus on delivering quality and\nsatisfaction.\n• Repair and upgrades\nNew Customs Homes\nRoofing Flooring\nSiding Doors\nWindows Decks\nPorches Int/Ext Painting\nInsulating Garages\nGazebos Saunas\nCustom Cabinetry Custom Trim\nWood Ceilings Additions\nRemodeling (specializing in Kitchens & Bathrooms)\nIf you have a project or repair that doesn't appear on this list, contact me and I’ll try to meet your\nneeds or refer you to someone who specializes that particular area.\nLicensed (Class A) & Fully Insured
You should always power wash your driveway before applying a sealant. At any given time, your driveway could be covered with algae and moss, tire residue, oil and rust stains, and any combination of leaves, twigs, and dirt. If you skip power washing, you’ll be trapping the dirt and grime beneath the sealant and lowering its chance of cementing itself to your driveway. While you can expect the cost to pressure wash your driveway to average between $100 and $350, the few hundred dollars beats an unattractive driveway or paying extra to reapply your driveway sealer.
Generally 1-2 hours, depending on the area and level of dirt accumulation.
Whether you need to winterize your pressure washer depends on where it will be stored. If it's kept in a location where temperatures could drop to freezing, any liquid left in the water pump can freeze, expand, and cause severe damage to the machine. To prevent this, you can add antifreeze to the pump. While emptying the machine with compressed air is an alternative, it can be a tedious process and may not remove all the liquid. If you can store the pressure washer in a relatively warm place with no risk of freezing, you won't need to add antifreeze. However, regardless of storage conditions, it is good practice to empty the gas chamber and refresh the oil before storing it for the winter.
Powerwashing services for businesses typically range from $200 to $1,500, depending on surface size, level of grime, and cleaning methods. Heavily stained or high-rise buildings may require additional labor and equipment.
You should never use bleach in a pressure washer. While bleach is effective at killing mold and mildew, it is a potent chemical that can corrode the machine's seals and nozzles, destroying it from the inside out. Additionally, pressure washing with bleach sprays the chemical into the air, which is dangerous if inhaled and can kill nearby plants, flowers, or harm animals that ingest it. If you need to remove mold or mildew, it is best to hire a professional who will use a safe and effective cleaning agent.
The Pounding Mill, VA homeowners’ guide to concrete driveway services
From average costs to expert advice, get all the answers you need to get your job done.
Between the endless customizations and decades of strength, the cost of a concrete driveway may be worth the investment. Let's break down your bottom line.
Thinking about a new concrete driveway? Learn about installation costs, design options, and how to hire the right local pro for your home's exterior upgrade.
Before you hire a pro to pour a new concrete driveway, you should have a good idea of what you need. Discuss these concrete driveway installation questions with a pro.