Get matched with top countertop and backsplash pros in Bacova Junction, VA

Tile countertops can be an excellent and budget-friendly option for a kitchen, provided they are installed correctly. It's important to choose tiles, such as ceramic, that are heat-, water-, and scratch-resistant. When the grout is properly sealed, it will resist stains, making the surface easy to clean. Tile is also considered a sustainable material. For a cohesive kitchen design and added protection, you can pair a tile countertop with a matching tile backsplash.

Since knowing how to install countertops correctly requires in-depth knowledge and understanding of the topic, we recommend hiring a professional countertops installer near you to work on this project. Kitchen countertops are a high-visibility investment, meaning mistakes made during DIY installation will be easy to spot, may cause damage, and potentially require re-purchasing materials. Professional countertop installers have the skills, tools, and experience to place your new kitchen feature safely and correctly.

The standard kitchen countertop height is 36 inches, so a 37-inch countertop should work fine. However, if you’re 5’4” or shorter, a 37-inch countertop might be too high. Ideally, the countertop will be three to four inches below your elbows.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.