Get matched with top locksmiths in Monticello, UT

If your door handle turns without opening, the most likely culprit is a loose or stripped spindle. This part connects the handles to the latch mechanism, and when it’s not properly engaged, turning the handle does nothing. Other issues might include a broken latch, loose screws, or even something small blocking an inner mechanism. In any case, it’s usually a matter of tightening, adjusting, or replacing a worn-out part inside the handle assembly—or calling in a professional to do it for you.

Typically, it can take around 15 minutes to rekey a lock. The time depends on the type of lock and how skilled you are at rekeying. The first time you rekey a lock, it may take a little longer. Once you get the hang of the process, it will move along much more quickly.

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.

If part of the key is protruding out of the lock, you can use a pair of needle-nosed pliers or tweezers to gently turn the key in the lock to open the door. If the key is fully inserted into the lock, you may also be able to use a key extractor to help turn the key into the unlocked position. 

But if the key breaks off halfway into the lock or you simply can’t reach it to help engage the unlocking mechanisms, you should probably call a professional.