Best sand and rock delivery pros near Moab, UT

Gravel driveways require regular maintenance because the material can shift over time. Routine tasks include raking the gravel to ensure an even layer, filling in ruts or low spots, and removing debris, especially after storms. You should also add fresh gravel as needed to prevent potholes, remove weeds by hand or with an herbicide, and occasionally spray the driveway with water to reduce dust.

Periodically, you may need to grade and level the entire driveway, which is often done every few years. Any refilled potholes should be compacted; for excessive dust, you can use a mechanical compactor. To minimize future maintenance, ensure the land is properly graded before installation and consider laying down landscaping fabric to help keep the gravel in place. In areas with heavy rain, reinforcing the edges can help prevent erosion. Additionally, it's best to avoid using a snowplow on a gravel driveway during the winter.

A base layer is typically required when installing artificial grass, and the specific materials depend on the surface where the turf is being placed.

If you are installing artificial grass over soil, you should lay down a sub-base and a weed barrier.

• Weed Barrier: A fabric weed barrier, weed membrane, or geo-textile paper is essential to prevent weeds from growing through and damaging the turf.

• Sub-base: This layer provides drainage, support, and prevents the turf from sinking. Common materials include a mixture of gravel and sand, such as crushed miscellaneous base (CMB), decomposed granite, decomposed limestone, or a specifically mixed road base. Other options include silica sand and granite sand.

If you are placing turf over a hard surface like concrete, you can often skip the sub-base and use a padded underlayment or shock-absorbent material like astro-cushion for comfort and safety.

If you are unsure which materials are best for your specific project, it's a good idea to consult with an artificial turf installer.

If you like the look of mulch in your plant beds, be aware that it can attract a variety of pests, including termites. To avoid wood-to-foundation contact, leave a one-foot barrier around your house and fill it in with rocks or gravel, starting mulch past that barrier and working it outward into your plant beds. 

Among the most common types of gravel are pea gravel, crushed stone, marble chips, jersey shore gravel, and base gravel. Gravel has different densities depending on whether it’s wet or dry or mixed with sand.