Get matched with top deck cleaning pros in Mendon, UT

Most building codes require that spindles or balusters on deck and stair railings be spaced no more than four inches apart. This safety standard, often called the '4-inch sphere rule,' is designed to prevent small children or pets from slipping through the railing. A good way to visualize this is that a 4-inch sphere should not be able to pass between two spindles. For the same safety reason, the space between the bottom rail and the deck floor should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is crucial to check your local building codes to ensure compliance before starting your project.

A cedar deck can increase your home's value if the project is executed well. The value added by a deck is influenced by factors such as location, materials, and craftsmanship. In regions with warmer climates, decks are particularly desirable, enhancing outdoor living spaces.

The key to getting the most value out of your investment, both in terms of home value and personal enjoyment, is to make sure your deck is built to exacting standards. You should consult with a professional deck builder to get the best results and the highest ROI.

Staining and sealing the underside of a deck creates a moisture barrier but traps water in the boards, quickly leading to rot. No matter how well you seal the above deck, water still gets through via nails and screw heads on the surface. Allow this water to flow naturally under the deck, where it is routed through the drainage system.

A deck that isn’t attached to a house is called a floating or freestanding deck. These standalone decks are built near ground level, so they usually don’t need deck stairs. Some don’t even require permits. Generally speaking, building a floating deck is faster and more DIY-friendly than constructing one that’s connected to your home.