Get matched with top oriental rug cleaners in Lapoint, UT

Different rug cleaning companies may prefer different methods of cleaning for area rugs, but many prefer to steam-clean rugs and carpeting. Steam cleaning avoids using detergents and cleaners that can be sticky or contain harsh chemicals. Shampooing a rug requires using brushes to agitate and remove the cleaning agent from the carpet, possibly subjecting the carpet fibers to unnecessary wear and tear.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

The fastest way to soak up water in carpet is to use a wet/dry shop vac to draw out as much water as possible. Afterward, apply firm pressure to towels to sop up any remaining moisture, then liberally sprinkle baking soda over the carpet and let it sit for at least an hour before vacuuming it up. You can speed up the process by opening windows, using blower fans to create airflow, and running a dehumidifier. 

Baking soda won't leave a carpet stain. However, the thing you're trying to clean up using it may leave a stain. Vacuum up any traces of baking soda after it's dry to remove the power. If you have any doubt about your particular carpet, test a spot of baking soda in an inconspicuous floor area to ensure it won’t discolor it.