Get matched with top floor polishers in Elsinore, UT

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

You can mop bamboo floors, but exercise caution to protect the material from excess moisture, which can seep into the bamboo, causing it to warp and well. Moisten a microfiber mop and wring it out until it’s just damp, or use a pH-neutral cleaner, as this will prevent damage to the bamboo fibers. Avoid harsh chemicals, like traditional floor cleaners. After cleaning, wipe the floor dry.

While it is not recommended, you can mix Bon Ami with vinegar for a more powerful cleaning mixture. However, you should avoid mixing other types of powder cleaners, such as Comet and Ajax, with vinegar or with each other, as the reaction often creates a toxic gas that’s dangerous to the human body.

Commonly used in garages, epoxy is a synthetic resin coating that goes over the top of concrete surfaces. If you’re deciding between polished concrete and epoxy flooring, the best choice depends on your needs and personal preference. Epoxy is durable and highly customizable, while polished concrete tends to require less maintenance. They’re both long-lasting with similar price points, and professional installation is recommended for each.