Get matched with top pavers and hardscaping pros in Trinity, TX

Most professional permeable paver installations take between 2 and 7 days, depending on the size and complexity of the project. Small patios or walkways may only take a few days, while large driveways with deep base layers, edging, and drainage components can take a full week or more. Weather, access to the site, and whether demolition is needed also affect the timeline.

It depends on the type of paver you have, but you should generally sand your pavers every five to 10 years. You should seal your pavers every three to five years.

It’s far more labor-intensive and expensive to demolish a concrete slab before laying down pavers. You’ll need a professional to break up and haul away the concrete, excavate underneath, bring in paver base or crushed gravel, and then level the area with leveling sand before laying the pavers. A new paver patio will cost around $1,000 to $2,000, which is more than laying pavers over a concrete patio, and takes longer to complete.

You can walk on newly sealed pavers as long as they’ve had enough time to dry and cure—typically after 24 hours for patios and walkways. Even so, don’t rush it. Humidity, temperature, and the type of sealant you use can stretch that window up to 72 hours. Rushing it can leave footprints or even damage the finish, especially if the surface hasn’t fully hardened. For driveways, wait at least three full days before parking or driving over them. Always check your sealant label for the most accurate timeline, since not all products cure the same way.