Get matched with top countertop and backsplash pros in Naples, TX

There are many benefits of granite countertops, but it’s not unusual for them to have seams—especially if you’re working with small slabs joined together. Seams are common on larger islands where the installer needs to use more than one granite slab to cover the surface. Luckily, because seams are normal in granite countertops, pros know how to hide them properly, so you’d never know they were there.

Durable, contemporary concrete countertops can increase home values. However, they might not offer as high an ROI as quartz or granite surfaces, which offer a timeless aesthetic and durability likely to appeal to a range of home buyers. Installing new countertops is a home improvement that can yield an average of 60% to 80% ROI when done well, using quality, perennially popular materials.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

No, in most cases, you do not have to remove your countertops to reface cabinets. Since refacing primarily involves updating the doors, drawer fronts, and exterior surfaces, your existing countertops can usually stay right where they are, making the process quicker and less disruptive. However, if your counters prevent the access needed to remove doors and drawers, they may need to be temporarily removed. It's best to consult with a professional cabinet contractor to assess your specific kitchen layout during an estimate.