Get matched with top driveway gate pros in Matador, TX

Thieves can open almost anything with enough time and the right tools, but they also prefer easy targets that are unlikely to get them caught. Forcing open gates is loud and difficult, and to be able to open one electronically requires extensive knowledge of the system, which most thieves don't have. Electric and other security gates are great deterrents because the thief will move to an easier target. If the thief is determined to enter your property, they will most likely find a different entrance point.

To make your gate safe, purchase a gate made from strong material such as wrought iron, stainless steel, or other metals. Ensure that the gate has strong joints and bars that are welded on rather than inserted loosely. If you’re concerned about people climbing over your gate, you can deter them by installing fence spikes along the top as an extra precaution.

There are a few possible issues that are causing your gate to sage. The hinges may be bent, or the screws holding the hinges to the post could fail—causing the gate to sag from one side to the other. The gate itself may also have come out of square due to failing supports, causing it to sag. On the other hand, it’s possible the gate isn’t the issue at all. The post holding the gate aloft may lean inward, causing the gate to sag.

In most cases, you will need a permit to install a gate or fence on your property. Before your local municipality can issue a building permit, you might also need a site plan or survey to identify property lines. Otherwise, you could infringe on your neighbor’s property, leading to having to pay to take down and re-erect the fence. Permits for a gate and fence usually cost under $100. Luckily, your gate installation company will usually pull the permits for you and handle all of the red tape.