Get matched with top lighting pros in Hart, TX

If half of a string of Christmas lights is out, it is likely because of a single burned-out, loose, or broken bulb within that section. Long strands of lights often contain more than one circuit, so when one bulb fails, it can cause the entire circuit (or half the strand) to go dark. To fix this, inspect the unlit section and test each bulb to ensure it is tight and functioning properly. Replacing the faulty bulb or repairing a damaged shunt will typically solve the problem.

While wet-rated and damp-rated lighting is designed to handle contact with moisture, there’s a difference between the two. Wet-rated lighting is safety-rated to be placed in areas with direct exposure to water, including your shower. Fixtures classed as wet-rated are made with waterproof seals to protect the filament and other electrical components from water and moisture. 

Damp-rated fixtures can be used in places with some moisture contact, but not direct exposure. They don’t have the same waterproof seals used in wet-rated fixtures. Damp-rated lighting can be used on your bathroom ceiling or along a wall outside of your shower.

If you’ve gone through the troubleshooting checklist for your motion detector flood light and it’s still not working, it’s time to consider a new one. Older models that need frequent fixes can be unreliable. Newer flood lights feature advanced technology that improves your lights’ sensitivity and overall performance. If you’re fed up with unexpected darkness, investing in a new light can give you the lighting you need to feel secure.

If you need to visually inspect your Christmas lights to determine which are good and which need replacement, there are a few things to look for. First, look for discoloration, such as a dark spot or two on the inside of the glass. The spot is an indication of a burnt filament. Also, look for missing filaments, cracked bulb glass, and broken sockets.