Get matched with top pavers and hardscaping pros in Falfurrias, TX

You have a few options if you’re looking for the best material for a steep driveway. Gravel and crushed stone are affordable and provide good traction, while resin helps prevent puddles from forming and can be coated with an anti-slip finish.

On average, concrete costs less than pavers for the same project. Standard broom-finished concrete costs from $2 to $15 per square foot. Stamped concrete costs between $8 to $28 per square foot. On the other hand, pavers cost from $8 to $50 per square foot. For any of these materials, the cost depends on which concrete finish or paver you choose. Keep in mind that the layout complexity, amount of site preparation, and location factor into the cost, too.

After removing existing moss, consider using paver blocking sand to fill the joints. This specialty material hardens once placed and serves as an effective barrier against moss and weeds. From there on, regularly clean your pavers and try to keep them dry. You can also seal your paver as a semi-permanent solution — just make sure you reseal every 3 to 5 years.

If you’re looking for a similar, eco-friendly driveway material, you might consider one of these options:

• Permeable pavement: This material is sometimes called “pervious” or “porous” pavement; it allows stormwater to drain into the subbase, eliminating storm drain costs. 

• Gravel: Consider paving your driveway with locally sourced gravel. By sourcing from a nearby source, your money won’t fund international shipping and will be invested back into your local community.

• Natural stone pavers: Because natural stone pavers are made from organically-produced stone, there’s no new manufacturing required, limiting the environmental impact. In addition, water easily flows and drains through the gaps in the pavers.