Best countertop and backsplash pros near Eldorado, TX

Epoxy is typically more affordable than granite, especially if you’re choosing a high-end slab. Most granite countertops cost $75 to $145 per square foot to install, with high-end varieties topping $185 per square foot. 

In contrast, epoxy countertops cost $50 to $150 per square foot to install. The material costs for epoxy are significantly lower than granite, but installation costs can be higher. Rather than simply cutting granite countertops to size before installation, your contractor will need to carefully pour the epoxy over an existing surface.

Unfortunately, you cannot put hot pans directly on laminate countertops, as the heat can cause significant damage. The heat can cause chips, burns, and marks, plus weaken the laminate. If you do have something hot you need to set down, then be sure you use a trivet or towel as a barrier between the countertop and pan so you can prolong its life.

The best type of wood for countertops is hardwood. Hardwood is much more durable and resilient than softwood, so it won’t scratch or dent as easily. Oak, cherry, maple, walnut, and teak are all popular options that are relatively common in North America. Some homeowners prefer to use pine or cedar, but make sure to seal your countertop to help prevent damage. Yellow pine fares better than white pine.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.