Get matched with top painters in Alanreed, TX

Roller marks are streaks or smudges that show up on the wall after painting. They can make the paint's surface look textured or uneven. To prevent roller marks, make sure there's enough paint on the roller when you apply it to the wall. You may have to dip the roller in the paint more frequently than you expect to ensure you have an adequate amount of paint on it.

Choosing the right type of roller can also help you avoid streaks and marks. If you're painting an interior wall, look for a roller with a low nap and choose one that's large enough for the job.

Use flat paint in the rooms that don’t need a lot of cleaning. Flat paint works well in bedrooms, where there is low human traffic, and having the walls soak up light keeps the look and vibe calm. Flat paint also hides imperfections, so if you spot a crack, dent, or patch in your wall, choose flat paint over something shinier.

When applying multiple coats, wait four to six hours for each coat to dry. Not waiting long enough can result in streaks, peeling, and uneven color. Plus, it will be more difficult to discern where the second coat has already been applied.

Brushes, rollers, and spray paint are the best ways to paint metal surfaces, depending on your project goals. Spray paint is the easiest method for painting metal and can make painting complicated pieces with many curves and grooves a breeze. However, using traditional paint with a roller or brush creates a harder, more durable finish.