Get matched with top fountain pros in Summerset, SD

Algae growth is a common issue for misters, but you can do several things to prevent it. First, use a sealed water tank with distilled or filtered water to fuel your misters. Second, blow out the misters after every use so no water is left in the tubing. Third, thoroughly clean the misting system every several weeks of use at minimum during the warmest months. Third, wherever possible positioning tubing and the water tank away from direct sunlight and in the coolest areas possible.

In addition to length and width, pond liners also come in various thickness levels. Thickness is measured in mils, a unit of measurement equal to one-thousandth of an inch, with most pond liners ranging from 15 to 60 mils in thickness. The smaller the number, the thinner (and weaker) the liner. To prevent rips and tears, it’s best to choose a pond liner that’s at least 30 mils thick.

Most home misters use several cups of water in a couple of minutes, or around a gallon per hour of use. That varies greatly depending on the size of the system and the power of the pump. If you are using professional services, you should ask about water use for your planned system when you’re getting an estimate. If you are using a water tank, make sure it’s filled before operation.

Most water features do not use a lot of electricity, averaging between 100 and 250 watts per day. The size of the motor can impact electricity usage. To reduce electricity usage, consider using a timer to turn the fountain off at night and when you’re away from your home. Solar power is another way to defray electricity costs after you recoup the cost of installing the solar components.