Get matched with top window cleaners in Redfield, SD

Professional window cleaners typically use either a white vinegar solution or a commercial hard water stain remover to clean hard water stains on windows. A common vinegar solution for this purpose consists of one cup of white vinegar mixed with a gallon of distilled or bottled water. The pro will spray the mixture and lightly scrub the window with a scrubby pad before cleaning with a standard cleaning solution. Alternatively, they may use a commercially available hard water stain remover and a scrubby pad, followed by a complete cleaning.

The easiest way to remove window decals is to soak the area in hot, soapy water. Let it sit for 15 minutes before scraping it with a plastic scraper or the edge of a credit card. You can also remove window decals with white vinegar, rubbing alcohol, or applying heat from a hairdryer or steam cleaner.

Yes, you should plan on being home when a window cleaner is cleaning your windows. The professional will clean both sides of the glass and will likely disassemble parts of your windows from the inside to clean and inspect the inner components, including the balances and weatherstripping. Much of this work requires interior access to your home, which means someone will need to be home to provide access to the window cleaner.

The best way to clean fine dust particles after construction is by combining dusting with vacuuming. Start up high by dusting ceiling fans, walls, window sills, countertops, and other surfaces throughout your house. Once the dust has settled, go over all of your floors with a high-powered vacuum, giving a little extra attention to the carpeting. Make a second pass with your vacuum, and then mop all hard surfaces to get any remaining dust. Don’t forget to vacuum your HVAC returns and supply vents and swap out the filters while you’re there.