Get matched with top excavation pros in Mobridge, SD

Using a drill to bore holes in the stump's center speeds up the process, whatever method you use. If you don’t have a drill, you can still chainsaw or chisel the stump to make it hollow; it will just take more elbow grease and time. Steer clear of burning the stump to hollow it if you can’t drill some holes in it first. Otherwise, getting it to light, stay lit, and burn right through will be a challenge.

Water lines are buried at various depths, depending on the type of line. For example, most sprinkler lines are buried between four and 12 inches underground. On the other hand, water mains usually sit between one and 3 feet below ground. However, they can go even deeper in cold climates to prevent freezing.

You should dig 3 to 6 inches deep for plastic edging. Dig as wide as you need to fit your plastic edging into it—2 inches is usually sufficient.

To locate an underground downspout, you should start by identifying where the above ground gutter drains. Look for an entry point, such as a pipe or elbow leading into the ground. Follow the surface path for signs like depressions, landscaping disruptions, or wet areas after rain. You can use a metal detector or plumber’s snake to trace the pipe underground. For deeper pipes, a professional locator tool or camera inspection may be necessary. Visual markers or utility maps can also guide the search.