Get matched with top pressure washers in Mclaughlin, SD

Your deck may look or feel fuzzy after pressure washing because the high-pressure spray tears some wood fibers as it removes the outer layer of dead and discolored wood. This fuzzy effect is a normal part of the pressure-washing process and will go away on its own in a few weeks. You can opt to spot-sand your deck if you’d like to remove it more quickly.

If pressure washers are stored in freezing conditions and aren’t pretreated for such temps, any liquid remaining in the water pump may freeze, expand, and severely damage your machine. While often recommended, emptying the machine with compressed air is a long and tedious process and still may not completely drain the liquid in this pressure washer part. But adding a bit of antifreeze instead will keep it in tip-top shape without the extra effort.

This process doesn’t necessarily require soap or detergent, but it definitely helps. You can get by with just using water, but remember, brick requires a lower-than-average pressure level when compared to concrete, so forgoing detergent increases the time it takes to spot clean stains and debris once you finish with the pressure washer. Brick is especially porous, so the less water you use on it, the better.

It is possible to wash your own roof, but we don’t recommend it. First, getting up on any roof is dangerous without proper safety equipment, especially if wetting a metal roof and making the surface slick. Additionally, it’s easy to damage your roof or force water between roof seams if you use a power washer, which can lead to property damage. Hiring a professional roof cleaner will save you time, keep you safe, and ensure that your roof looks new again without damaging it in the process. Plus, roof cleaning is a relatively affordable home improvement project.