Get matched with top bathtub restoration pros in Hoven, SD

If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. 

Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.

Resurfacing a bathtub is less expensive than replacing one. Resurfacing a tub costs about $330 to $630, depending on the material, while replacing a tub costs an average of $4,150. But remember that resurfacing is a temporary solution for a worn-out tub, and you may need to refinish a tub every few years to keep it looking new.

Clean with non-abrasive cleaners, avoid harsh chemicals, and periodically check seals to prevent water infiltration.

There are a few ways to check whether your tub is fiberglass or acrylic. If your tub is a color other than white, then your tub is likely acrylic (as fiberglass tubs are usually white). Check to see if there is discoloration on the bottom of the tub, because if it’s yellowed, then you can be fairly sure it’s fiberglass.

Also, fiberglass tubs have thinner edges and are cool to the touch. Acrylic, on the other hand, is either room temperature or warm to the touch.