Get matched with top dryer vent cleaners in Gettysburg, SD

While a professional can always help, there are some common plumbing culprits you can check yourself to see if you can find the sewer gas smell. For example, you should check your water traps, sometimes called P-traps and S-traps, which are located under sink, shower, and laundry drains. The wax ring beneath the base of your toilet, which creates a watertight seal with the plumbing, could also have gone bad.

The length of an allowable dryer vent varies based on the local building codes and regulations. Typically, the maximum range is 25 to 35 feet. However, if the vent must have any 90-degree turns, you may see a reduction of five feet from the maximum. Some municipalities may have no specific maximum allowable length as part of the code. Typically, installers will run the vent over the shortest possible distance for safety. The dryer vent cleaning cost is less with a shorter vent length as well. 

Using a leaf blower to clean your dryer vent is not recommended. While it might seem like a quick solution, it can push lint and debris further into the vent, creating a blockage, making the problem worse, and posing a fire hazard. The force from the blower could also damage the vent itself. For a safe and effective cleaning, it is better to use specialized tools, such as a dryer vent cleaning kit with a rotating brush head that scrubs the lint from the ductwork. Alternatively, hiring a professional will ensure the vent is cleaned thoroughly and safely.

Yes, mold can grow in a wet dryer vent. Mold is a type of fungi, and fungi thrive in warm, moist conditions. Dryer vents need to be aired out so heat can escape and moisture can dry. If your dryer vents aren’t properly vented, the trapped heat and moisture will cause mold to grow, and the mold can spread to the dryer and even your clothes. Not only can this leave a musty smell on your freshly laundered clothes, but—more importantly—it also poses a health risk.