Get matched with top pressure washers in Ethan, SD

Yes, pressure washing your deck before staining is a great idea because it clears the wood from any dirt, dust, and debris that could get in the way of solid stain coverage. Washing makes it easier to stain your deck and helps the stain grip the wood so it lasts longer. Pressure washers are faster and easier on your body than scrubbing your deck by hand.

You can certainly utilize a pressure washer to effectively clean your garage floor. If you're dealing with oily residue, consider adding a degreaser to the pressure washer solution. Prior to using the pressure washer, make sure to thoroughly sweep the garage floor to eliminate any loose dirt or debris.

Begin the pressure washing process from the back of your garage, which is closest to your home, and work your way towards the front. This ensures that the water and dirt are directed outside. In case you've applied a cleanser or degreaser, it's a good idea to give the floor another pass with clean water using the pressure washer to ensure a thorough rinse.

You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.

Most deck lumber is softwood that you can easily damage with the spray from a power washer. Most power washers, though, have a lower pressure setting that’s relatively safe for deck materials if you’re careful to hold the nozzle at least a foot from the surface and continue moving without hovering in one area.