Get matched with top excavation pros in Brookings, SD

It all depends on the scope of the project. A trencher can certainly save time and energy, but you might not need to dig that deep in the first place. Aside from the depth of the trench, the quality of the soil matters. If it’s light, soft soil, you might try a shovel first. However, if the soil is rocky and hard or there are obstructions in it, like tree roots, a machine trencher might be the better option.

It takes two to three hours to trench 100 feet with a mechanical trencher or 10 to 12 hours if digging with a shovel. The total time to dig a trench depends on the depth, width, soil type, terrain, trencher type, and your level of experience. Digging in clay or rocky soil takes longer than soft ground.  

Prior to excavation, you should prepare the dig site and call 311 before you sign anything.

To get your site ready for excavation, you should move anything in the area that isn’t affixed to the land. You can save money on the excavation by removing hardscaping, including walkways, decks, concrete patios, and paver patios.

Before you carry out any digging, you should call 311 to confirm that there are no utility lines running through your excavation site. Skipping this step could lead to severe injury and property damage if your excavator hits a water, sewage, or gas line.

Depending on the severity of the freeze and the method used, thawing frozen underground pipes can take anywhere from 30 minutes to several hours. Applying heat directly to the pipe using heat tape, infrared lamps, or hot water jetting can speed up the process. However, patience and careful monitoring are key to avoiding pipe damage.