"Love my new sliding door. Everyone in this company is so very nice, professional and knowledgeable. Addressed all of our concerns and issues. Service guys are so good installing these doors. Even with crazy winds in Rapid City my door does not even rattle. Love the mid door locking system. Windows are next for us!! Highly recommend Renewal by Andersen to everyone!!!"
"The workers are ver professional, quiet, reliable and perform great quality drywall. The repaired drywall/ popcorn in our kitchen ceiling. They did such a great job I hired them to do the same in our living room."
"Ryland was exceptional! Looking at my new deck, automatically brings a big smile to my face! I am so pleased with the work and the fact he got it done before my visitors arrived. I won’t know the full impact until the weather gets cold, but the ramp is heated, so if all goes as planned, I won’t sustain another broken bone! I highly recommend Ryland to anyone needing good quality wirk."
"We had an exceptional experience with Xtreme Xteriors. We were able to do window replacement on our 1978 built home. They turned out great. After that project, we had them do a bathroom remodel for us. They replaced our old fiberglass tub with a nice new walk-in shower. They did everything start to finish!"
Saint's Care is a leader in providing our customers with the highest quality service in an honest, efficient, and professional way. Our pledge is to create successful relationships with our customers and community by building trust, treating every project with the utmost integrity and exceeding expectations. Accredited by The U.S. Airforce! \n\nI look forward to working with you!\n
"Excellent work. We purchased natural cherry cabinets in shaker style, with the panels made of solid wood rather than veneer. That is more difficult work, as each panel has to be constructed from several planks. Moreover, the clear finish would leave any flaws more visible. Simply put, the doors are beautiful--flawless in both construction and finish. They are similar in quality to custom cherry furniture we own."
"The staff was prompt and courteous. I can't say anything about the product because it was just installed, but I'd recommend the company for their people."
"Michael did a good job, completed as promised, and communicated well with us. He was pleasant and helped us with the one decorating decision (color). I would recommend him. :)"
"Job was completed on time and with quality workmanship. Self starter and handled arising problems without supervision. We would definitely hire again."
Most slab doors do not have hinge cutouts, making them a complete blank slate. You will have to measure and cut the mortises yourself. You can order a slab door from a home improvement store and ask them to make the cuts, although you still have to take the measurements independently.
Doors get more sticky in the summer. Contrary to popular belief, doors can also stick in the winter since humidity causes doors to stick during both seasons. However, thermal expansion and humidity in the summer mean that the thermal heat and moisture in the air both play a role in causing a door to stick.
It’s certainly easier to paint a door while it’s still on its hinges, but you may get better results if you remove it from the hinges. Painting a door off the hinges allows you to work on it horizontally, making prep work easier, reducing drips, and allowing undisturbed drying time.
No, a storm door should not replace a regular door. It lacks the durability, insulation, and security of a proper exterior door. Most storm doors have lightweight frames and minimal locking hardware, and they aren’t meant to stand alone. While they work well as a backup to your main entry door, relying on one as your only barrier would likely lead to drafts, higher energy bills, and safety concerns.
To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.
The Black Hawk, SD homeowners’ guide to door services
From average costs to expert advice, get all the answers you need to get your job done.
Whether you’re installing a new door or replacing an existing one, the cost of door installation varies based on location, door type, framing needs, and other factors.
Are you looking to upgrade an old door in your home? Use this interior door installation cost guide to estimate the project's total cost and learn how to save.
There are many types of interior doors, from swinging to folding and sliding. This article breaks down each to help you find the right door for your needs.
