Get matched with top marble restoration pros in Bluffton, SC

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

Since cesspits must be watertight to prevent leakage and contamination, so they’re typically constructed from one of a few tough materials. Most cesspits are made from fiberglass, concrete, polythene, or steel. Each of these materials carries certain advantages—fiberglass, for example, is resistant to corrosion but may be more prone to cracking if it’s at high capacity.

Engineered stone is known for its durability, lasting 15 to 20 years or longer. Of course, this range assumes high-quality materials and regular maintenance. After a couple of decades, the stone will start showing its age. Watch for discoloration, fading, stains, and burns, but it’s unlikely that engineered stone will experience structural failure.

Engineered quartz is an artificial, nonporous material made from a mix of mined ground quartz, polymer resins, and pigments, making it a lower-maintenance option. In contrast, quartzite is a natural stone composed of sandstone, which makes it highly resistant to heat but often requires sealing and more careful upkeep. You should clean both types of stone with non-abrasive cleaners that have a low or neutral pH, avoiding acidic cleaners like vinegar, as well as wire brushes and scouring pads.