Get matched with top concrete resurfacing pros in versailles, PA

Pervious concrete should be between 4 and 8 inches thick to drain water properly. Surfaces like parking lots and driveways should be at least 6 inches thick to accommodate the weight of vehicles, while patios and walkways may be poured between 4 and 6 inches thick. There’s no standard for pervious concrete thickness, but in most cases, the more weight the surface will need to hold, the thicker it should be.

If there is standing liquid on your concrete, remove it before attempting any of the above cleaning methods. For small amounts of water, use rags, a bucket, and a mop. For larger areas of liquid, lay down cat litter or baking soda to soak up the water first. If you have extremely large pools of water sitting on your concrete, break out the wet vac and get to work.

For cracks in asphalt driveways, you can use crack filler or cold-patch asphalt mix, while concrete driveways can be repaired with a concrete patch or resurfacer. To fix the driveway cracks, apply the filler directly into the crack using a caulker and then level it with a putty knife.

You have different options depending on the scale of repair needed. If you are repairing minor cracks that are between ¼ inch to 1.5 inch wide and less than half an inch deep, a self-leveling polyurethane sealant would be your best choice. Polyurethane sealants dry to the touch within one to two hours. Since they come in a tube applier, you also have the option to complete the repair without emptying out your garage.