"Had HD carpentry repair my deck steps, and add a new handrail. Excellent work, decent prices, very polite. Cleanup was immaculate. I would give them 10 stars if I could. I would definitely recommend them and I look forward to calling them again."
"Roger was fantastic. The quality of his work was outstanding. He completely retiled the tile in our kids bathroom. By the time he was done, we wanted to make it our master bathroom. He was very pleasant and easy to deal with as well. He did such a good job with the tile that we had him do a couple additional small carpentry jobs as well. It turns out he is very good and at lot of different remodeling jobs. Next time we are planning to do a remodel, we intend to hire Roger."
Carpenter with 35 years experience in all phases of building construction and remodeling. \nReliability, reasonable pricing and attention to detail are just a few of the things that you can expect from me. \nLet’s talk about your fall and winter projects big or small!\nProviding service in Central Twins, and Southern Finger Lakes region. \nI’ll complete your job to your expectations in a timely manner and at the best possible price.
"I knew it was going to be challenging to find an investor that would lend me money for this real estate venture. I have lived 20 years in a four unit historic condominium building in downtown Jersey City and I wanted to buy the unit above me as an investment property. But with Fanny Mae and Freddy Mac rules, they would not give me a loan because I would own half the building and this would give me too much control over condo association decisions. I checked with Angie's List where Central Lending was well recommended and spoke with Mark, the president of Central Lending, about my situation and that I needed an unconventional loan outside of Fanny Mae and Freddy Mac oversights. After many disappointments and on the very last day of my contract with the seller, Mark found a lender. And on the very last day of the window to the loan, it closed. I cannot thank Mark and his assistant Judy enough for their patience and steadfast of seeing this through. I cannot tell you the emotional roller-coaster ride I went through during the 4 1/2 month duration. There were many moments that I wanted to give up but Mark reassured me that the sale would happen. Without Mark's personal intervention with the lender and title company, this deal would not have closed. You can be sure that when I am in the market to buy unit #3, I will not hesitate to contact Central Lending. Thank you so much."
My company builds, repairs and pressure washes decks, siding, floors, windows, doors foundations, gutter installation or cleaning, fences, We only do roofs on brand new structures! I do free estimates ! I've owned the business for 5 years but I have been doing this for 15 and some of my workers have been doing it 30+
"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
"It was okay but the woman who came out was a little bit too concerned about speaking her own mind and I do not think that the time frame was long enough for her to really get a grasp of what it was that we were looking to do. She had some good ideas but it was not enough to convince me to go further and purchase an additional time, however, we had a particularly challenging project. It was not like it was a simple little thing and I threw a lot at her. She was not particularly prepared when she came so we had to spend part of the time getting her prepared. I had sent her an email in advance with the pictures and everything and said, "Here, so that you are going to be thinking about this before our call." And when she got on there, she had not really done that. So, that took some of the time for me to go and say, "Okay, take a look at the email. Here are the pictures." She did not come ready to go with advice and that was a little bit disappointing. The advice that she had was good but it did not solve my problem and it did not convince me to purchase additional time. I was not unhappy with her. It just did not wow me. It was what it was and it was fine. She came out within the time frame that we purchased the deal because we had just purchased the house. We were living in North Carolina and we purchased the house in Florida. We moved on December 2nd so it was between the date that we purchased the deal and December 2nd because we had to talk to her about what we wanted to change about the house before we moved. Ours was not your typical project. If somebody came in and just showed her a picture of a room with blank walls and they wanted her to help decorate it, I think that she could do that but ours was pretty hard."
Yes, you will need a jack for a rim joist replacement. To prevent sagging and facilitate the removal of load-bearing wood, you’ll need to relieve the pressure from this joint before beginning work.
Due to hydraulics and other specialized equipment, a sill plate and rim joist replacement are not typically a DIY project. Hiring a professional structural engineer and experienced contractors is the best approach to replacing rotted sill plates and rim joists.
It's possible to turn your carport into a living space, but there are additional factors to address over turning it into a garage. HVAC, plumbing, and electricity won't be optional, and you'll need finished flooring, drywall, trim work, and legal ceiling height, for starters. Also, keep in mind that living space conversions may require upgrading the foundation underneath, and the permits might be more expensive as well.
When choosing a drywall anchor, consider the weight of the object you're hanging and how much weight the anchor will need to support. The heavier the weight, the stronger the anchor you'll need. You’ll find the weight capacity on the packaging when shopping for anchors.
Also, remember that you can use more than one anchor when hanging something on the wall. If you're using multiple anchors, divide the object weight by the number of anchors to determine how much each will need to support. If you need help deciding which drywall anchor to use, you can hire a handyperson to hang your objects.
Yes, walls on the top floor can be load-bearing if stacked on the floor’s foundation.
Framing a basement takes three to five days, on average, when completed by a professional, though it may take longer for a larger space. Keep in mind this doesn’t include the time to complete the design, obtain permits, and install the drywall on the framing. On average, fully finishing a basement takes an average of 45 days.
The Troy, PA homeowners’ guide to carpentry services
From average costs to expert advice, get all the answers you need to get your job done.
Add a wow factor to your home with a chandelier. Chandelier installation costs depend on style, location, and labor, so learn what you can expect to budget.
When you’re tackling a project or hiring a contractor, it’s helpful to know key carpentry terms. From end grain to dovetail joints, here’s a complete list.
