Get matched with top pool table assembly pros in Southmont, PA

You should add chlorine within 48 hours of filling your pool with water. In just 24 hours, bacteria and algae will begin to grow and contaminate your water. After that point, you’ll need to shock the water with high levels of chlorine, and you’ll likely need to do additional vacuuming to get the pool clean. It’s important to check your chlorine levels two to three times a week and add more chlorine as needed to maintain a healthy level.

Building an in-ground pool can take anywhere from two to three months, and weather can absolutely throw a wrench in your timeline. Generally, you can expect to spend two to six weeks obtaining permits, a week excavating and preparing the land, and about a month or two building the actual pool (including the plumbing and electrical work). Keep in mind that concrete takes around 30 days to cure, but it won’t take nearly as long to install a fiberglass insert or vinyl liner.

Your pool should only lose around 1/4 of an inch of water per day, give or take. More wind, sunlight, and heat will cause this number to increase, while rainy or cloudy days will decrease the amount of water that evaporates.

Shipping container pools are prone to rust and corrosion over time, especially if you install a saltwater system. Though the interior of your pool should be lined, the outside is at risk. Luckily there are a few things you can do.

Elevate your pool or place it on a foundation to prevent moisture buildup along the bottom of the container. Apply a rust inhibitor or paint to protect the outside of your pool, and maintain the proper chlorine levels to reduce the rate of corrosion. Regularly inspect your pool for signs of corrosion, and take action when necessary.